Thursday, February 13, 2020

Resurrecting A World War II Fuel To Fight Flight Shaming

By Julianne Geiger - Feb 06, 2020


“green” jet fuel based on a chemical process created by the Germans for the Luftwaffe air force during World War II may have just found a new purpose in the burgeoning era of flight shaming; but is it commercially viable?
German scientists think so.

Today, German scientists are working together to revive an old kerosene project that could make a commercially viable synthetic jet fuel in a move that will hopefully save airlines from the latest air travel trend - flight shaming.  
Of course, the 1925 kerosene creation wasn’t the green version - it relied on coal and other fossil fuels to create the kerosene. But today’s version of the kerosene project would see this kerosene derived from water.
What’s more, this green version actually pulls carbon dioxide out of the air during the creation process.
If successful, the process could not only put an end to the rising emissions from air travel, but it could also strip away demand for crude oil should the current fossil-fuel based jet fuel be replaced.

How it Works
The process for making this power-based fuel is a methanol synthesis process that produces synthetic methanol. It is derived from water, which is then fractured into oxygen and hydrogen, and then combined with carbon.
This synthetic methanol is then refined into a product such as kerosene.
Compared to another synthetic-producing process called Fischer-Tropsch synthesis, this synthetic methanol process allows the manufacturer to better tailor the end product and reduce any unwanted by-products, according to Heide.
Still, the process will take a huge amount of electricity. In order to be carbon neutral, this electricity would need to come from renewable sources. This is a big ask, but one that scientists say is doable, even on a commercial scale.
German scientists are working on the latest iteration of this process, working under the direction of Bremen University in a project called KEROSyN100Related: Are Oil Markets Overreacting To The Coronavirus?
While there are other synthetic aviation fuel projects currently underway, Heide believes it is the only one using a methanol synthesis process.
Decades ago, US Navy scientists made headway in a similar project, creating jet fuel from seawater. However, they have failed to reach any large scale - yet.
The Navy’s project involved a cell that pulled pure and concentrated carbon dioxide from the seawater - a superior source than the carbon dioxide from flue or stack gases produced from burning fossil fuels. The process also simultaneously produces hydrogen, which helps to recover the CO2. The two gases are slammed together to create fuel. This is the same basic principle as the Heide project.  
This unit the Navy was using was able to capture 92% of carbon dioxide from the seawater, where it is 140 times more concentrated than in the air. The energy supplied to the cell went 100% towards making hydrogen - not the extracting process. Then, the gases are converted into olefins using an iron catalyst. 
In 2013, the Navy produced one liter of fuel a day this way. Small potatoes, but a success nonetheless. The Naval Research Laboratory hoped the seawater fuel would reach commercial viability in 10 to 15 years. That puts the target between 2023 and 2028.
American Money
This newest iteration of “green” jet fuel is being made at Klesch Group’s Heide oil refinery - a refinery that American billionaire Gary Klesch purchased from Royal Dutch Shell in 2010 at a time when oil companies were looking to shed European downstream assets as refining margins shrunk.
At the time of Klesch’s purchase, Heide, a landlocked refinery in Heide Germany near the North Sea, was capable of processing 93,000 barrels of crude oil per day. Banking on downstream’s long-term prospects, Klesch snapped up or built multiple refineries around the world, including a 300,000 bpd refinery in Libya. The group’s latest move was a deal in December to take over operations from PDVSA for Venezuela’s Isla refinery in Curacao.
Lufthansa has signed an agreement with the Heide refinery to produce and use this environmentally friendly kerosene, which will be made from surplus wind energy. The kerosene is still in the R&D phase now a Heide spokesperson told Oilprice.com, but it has plans to deliver first synthetic kerosene by 2023, and to supply 5% of Hamburg airport’s jet fuel supply with synthetic kerosene by 2024.
The HangUps
In its 2009 project, the US Navy ran into some snags. First, while concentrations of carbon dioxide in water are many times greater than those in the air, it’s still a small amount, at just 100 milligrams per liter. To put this into perspective, you would have to process nine million cubic meters (almost 2.4 billion gallons) of water to make just 100,000 gallons of fuel. 
Second, the water needs to be pumped into the cell - ostensibly using some form of energy. And if the vessel uses fuel to make that electricity, well, the whole process would be a wash and have no value. Related: Energy Stocks Retreat On Poor Earnings
The third hangup was that the process produced methane. Most of the gas was converted, but some was not.
The fourth hangup is that when the fuel is burned, it does release carbon. The Navy mentioned that this would be a constant state of equilibrium; with carbon released into the air before being recycled from the sea again.
The latest project hopes to resolve some of the hangups by using wind energy to power the process.
If the current project to use renewable energy as a means of creating this greener jet fuel is successful on a large scale, mass adoption is a near certainty. While the transportation sector is busy converting ICE vehicles into electric ones to combat climate change, no current alternative to fossil fuel-powered air travel is viable. And never has it been more imperative for the transportation sector to figure out how to duck the climate change blow.  
By Julianne Geiger for Oilprice.com

A greener, simpler way to create syngas

**A greener, simpler way to create syngas
Schematic showing the atomic structure of the copper-ruthenium nanoparticle catalyst. Credit: John Mark Martirez/UCLA
Researchers from UCLA Samueli School of Engineering, Rice University and UC Santa Barbara have developed an easier and greener way to create syngas.
A study detailing their work is published today in Nature Energy.
Syngas (the term is short for "") is a mixture of carbon monoxide and hydrogen gases. It is used to make ammonia, methanol, other industrial chemicals and fuels. The most common process for creating syngas is coal gasification, which uses steam and oxygen (from air) at high temperatures, a process that produces large amounts of carbon dioxide.
One more environmentally friendly way to create syngas, called methane dry reforming, involves getting two potent greenhouse gases to react—methane (for example, from natural gas) and carbon dioxide. But that process is not widely used at industrial scales, partly because it requires temperatures of at least 1,300 degrees Fahrenheit (700 degrees Celsius) to initiate the  reaction.
Over the past decade, researchers have tried to improve the process for creating syngas using various metal alloys that could catalyze the required chemical reaction at lower temperatures. But the tests were either inefficient or resulted in the  being covered in coke, a residue of mostly carbon that builds up during the process.
In the new research, engineers found a more suitable catalyst: copper with a few atoms of the precious metal ruthenium exposed to visible light. Shaped like a tiny bump about 5 nanometers in diameter (a nanometer is one-billionth of a meter) and lying on top of a metal-oxide support, the new catalyst enables a chemical reaction that selectively produces syngas from the two greenhouse gases using visible light to drive the reaction, without requiring any additional thermal energy input.
In addition, in principle, the process requires only concentrated sunlight, which also prevents the buildup of coke that plagued earlier methods.
"Syngas is used ubiquitously in the  to create many chemicals and materials that enable our ," said Emily Carter, a UCLA distinguished professor of chemical and biomolecular engineering, and a corresponding author of the paper. "What's exciting about this new process is that it offers the opportunity to react captured greenhouse gases—reducing  emissions to the atmosphere—while creating this critical chemical feedstock using an inexpensive catalyst and renewable energy in the form of sunlight instead of using fossil fuels."



No comments:

Post a Comment