Wind and waves: A step toward better control of heavy-lift crane vessels
Massive heavy-lift crane vessels, capable of hauling thousands of tons, navigate the rough waves and strong winds offshore to construct wind turbines and oil fields in the ocean. An international team of researchers has developed a new modeling system to help improve the control, and ultimately the safety, of such vessels. They published their approach in the April issue in IEEE/CAA Journal of Automatica Sinica.
"Dynamic positioning allows the ship to stay fixed in a certain location, by acting on the thruster," said paper author Simone Baldi, professor in the School of Mathematics and School of Cyber Science and Engineering, Southeast University in China, and guest with the Delft Center for System and Control, Delft University of Technology in the Netherlands.
This positioning operation acts as a counterbalance. The thruster applies equal force in the opposite direction of the wind or wave that attempts to dislodge the ship.
"However, it sometimes happens that the dynamic positioning does not cope with such changes, leading the ship to oscillate instead of remaining fixed in one spot," Baldi said. "Our approach allows the dynamic positioning to be robust in challenging sea conditions with large waves."
To help the vessels safely work in rough conditions, Baldi and his team augmented the dynamic positioning model system with a digital observer that can translate wind or wave disturbances into specific measurements that reflect position and velocity.
Baldi noted that other proposed models also include observers, but, he said, those observer designs typically depend on vessels responding quickly to measured disturbances -- which is often impossible due to the sheer size of the thrusters and propellers.
To address this challenge, the researchers incorporated known variables, such as the strength of the lines and thrust holding the ship to the construction site, and worst-case scenario ranges for unknown variables, such as wind and waves. The researchers then applied an observer-controller composite that converts motion into measurements to inform operation directions while also allowing the vessel to respond in a reasonable timeframe. The design is guided by key performance indicators while considering the worst-case uncertainty scenarios.
"Currently, we have tested our method in a realistic simulation, which is only a first step," Baldi said.
Next, Baldi said, the researchers hope to test the proposed solution on a small-scale ship under controlled conditions before moving on to tests on heavy-lift crane vessels in the sea.
###
J. Ye, S. Roy, M. Godjevac, V. Reppa, and S. Baldi, "Robustifying dynamic positioning of crane vessels for heavy lifting operation," IEEE/CAA J. Autom. Sinica, vol. 8, no. 4, pp. 753-765, Apr. 2021.
http://www.
IEEE/CAA Journal of Automatica Sinica aims to publish high-quality, high-interest, far-reaching research achievements globally, and provide an international forum for the presentation of original ideas and recent results related to all aspects of automation.
The first Impact Factor of IEEE/CAA Journal of Automatica Sinica is 5.129, ranking among Top 17% (11/63, SCI Q1) in the category of Automation & Control Systems, according to the latest Journal Citation Reports released by Clarivate Analytics in 2020. In addition, its latest CiteScore is 11.2, and has entered Q1 in all three categories it belongs to (Information System, Control and Systems Engineering, Artificial Intelligence) since 2018.
Why publish with us: Fast and high quality peer review; Simple and effective online submission system; Widest possible global dissemination of your research; Indexed in SCIE, EI, IEEE, Scopus, Inspec. JAS papers can be found at http://ieeexplore.
No comments:
Post a Comment