Record-breaking lithium-metal cell
Nickel-rich cathode and ionic liquid electrolyte enable extremely high energy density and good stability – researchers report in joule
Peer-Reviewed PublicationIMAGE: WITH A PROMISING COMBINATION OF CATHODE AND ELECTROLYTE, THE HIU RESEARCHERS AIM TO MAKE A VERY HIGH ENERGY DENSITY POSSIBLE. (PHOTO: AMADEUS BRAMSIEPE, KIT) view more
CREDIT: AMADEUS BRAMSIEPE, KIT
Currently, lithium-ion batteries represent the most common solution for mobile power supply. In some applications, however, this technology reaches its limits. This especially holds for electric mobility, where lightweight and compact vehicles with large ranges are desired. Lithium-metal batteries may be an alternative. They are characterized by a high energy density, meaning that they store much energy per mass or volume. Still, stability is a problem, because the electrode materials react with conventional electrolyte systems.
Researchers of Karlsruhe Institute of Technology (KIT) and the Helmholtz Institute Ulm for Electrochemical Energy Storage (HIU) have now found a solution. As reported in Joule, they use a promising new combination of materials. A cobalt-poor, nickel-rich layered cathode (NCM88) reaches a high energy density. With the usually applied, commercially available organic electrolyte (LP30), however, stability leaves a lot to be desired. Storage capacity decreases with an increasing number of cycles. Professor Stefano Passerini, Director of HIU and Head of the Electrochemistry for Batteries Group, explains the reason: “In the electrolyte LP30, particles crack on the cathode. Inside these cracks, the electrolyte reacts and damages the structure. In addition, a thick mossy lithium-containing layer forms on the anode.” For this reason, the scientists used a non-volatile, poorly-flammable, dual-anion ionic liquid electrolyte (ILE) instead. “With the help of ILE, structural modifications on the nickel-rich cathode can be reduced significantly,” says Dr. Guk-Tae Kim from the Electrochemistry for Batteries Group of HIU.
Capacity Keeps 88 Percent after 1000 Cycles
The results: The lithium-metal battery with the NCM88 cathode and the ILE electrolyte reaches an energy density of 560 watt-hours per kilogram (Wh/kg) – based on the total weight of the active materials. Its initial storage capacity is 214 milliampere hours per gram (mAh g-1) of the cathode material. After 1000 cycles, 88 percent of the capacity are retained. The average Coulombic efficiency, i.e., the ratio between discharge and charge capacity, is 99.94 percent. As the battery is characterized by a high safety, the researchers have made an important step towards carbon-neutral mobility. (or)
###
About the Helmholtz Institute Ulm
The Helmholtz Institute Ulm (HIU) was established in January 2011 by Karlsruhe Institute of Technology (KIT), Member of the Helmholtz Association, in cooperation with Ulm University. With the German Aerospace Center (DLR) and the Center for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW), two other renowned institutions are involved in the HIU as associated partners. The international team of about 130 scientists at HIU works on the development of fundamentals of future energy storage systems for stationary and mobile use.
Original Publication (Open Access)
Fanglin Wu, Shan Fang, Matthias Kuenzel, Angelo Mullaliu, Jae-Kwang Kim, Xinpei Gao, Thomas Diemant, Guk-Tae Kim, and Stefano Passerini: Dual-anion ionic liquid electrolyte enables stable Ni-rich cathodes in lithium-metal batteries. Joule. Cell Press, 2021. DOI: 10.1016/j.joule.2021.06.014
https://doi.org/10.1016/j.joule.2021.06.014
More about HIU: https://hiu-batteries.de/en/
Contact for This Press Release
Sandra Wiebe, Press Officer, phone: +49 721 608-41172, email: sandra.wiebe@kit.edu
Being “The Research University in the Helmholtz-Association,“ KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility and information. For this, about 9,600 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 23,300 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life. KIT is one of the German universities of excellence.
This press release is available on the internet at http://www.kit.edu/kit/english/press_releases.php
The photo can be downloaded at https://www.kit.edu/downloads/pi_bilder/2021_075_Rekordverdaechtige%20Lithium-Metall-Batterie_1.jpg and can be requested at presse@kit.edu or by phone +49 721 608-41105.
The photo may be used in the context given above exclusively.
JOURNAL
Joule
METHOD OF RESEARCH
Experimental study
ARTICLE TITLE
Dual-anion ionic liquid electrolyte enables stable Ni-rich cathodes in lithium-metal batteries
ARTICLE PUBLICATION DATE
17-Aug-2021
CAPTION
The ionic liquid electrolyte ILE (right) largely prevents structural modifications on the nickel-rich NCM88 cathode. After 1000 cycles, battery capacity still reaches 88 percent. (Figure: Fanglin Wu and Dr. Matthias Künzel, KIT/HIU)
CREDIT
Fanglin Wu and Dr. Matthias Künzel, KIT/HIU
No comments:
Post a Comment