New method for polyurethane synthesis using fluorine compound developed jointly by Kobe University and AGC Inc.
IMAGE: A NOVEL SYNTHETIC METHOD OF NON-ISOCYANATE POLYURETHANE (NIPU) view more
CREDIT: TSUDA AKIHIKO
Main points
- A manufacture method of polyurethane not using isocyanate (a highly toxic raw material).
- Achieves an environmentally friendly polyurethane manufacture method not using either solvents or catalysts.
- By using a fluorinated carbonate jointly developed by Kobe University and AGC, enables the synthesis of a variety of polyurethanes from the conventional raw material of polyurethane in a safe, inexpensive, simple and environmentally friendly manner.
- This synthesis method exhibits utility and versatility and enables the synthesis of 12 types of general-purpose urethanes and one (special) type of fluorinated polyurethane.
- Because the polymerization reaction proceeds at a lower temperature than the non-isocyanate methods reported to date, a high-quality polyurethane is obtained which is highly transparent without discoloration and has high strength and high elasticity (a high molecular weight having a regular structure).
- The fluorinated alcohol which is the only byproduct can be recovered and can be reconverted to fluorinated carbonate in the photo-on-demand organic synthesis method.
- This is a novel and very useful synthesis method enabling the replacement of several of the current isocyanate methods and contributes to implementing a sustainable society.
- This is an example of the success of university-industry cooperation between Kobe University and AGC, which was in receipt of support from the JST A-STEP* cultivating success (2018 – 2021) program
(*Adaptable and Seamless Technology Transfer Program through target-driven R&D)
Background of the research
Polyurethane is highly elastic, wear resistant and durable, and is used, for example, in cushions, fibers, thermal insulation materials, dyes, adhesives and automobile parts. Polyurethane is an industrially-important polymer material, with an estimated worldwide market value of 75 billion dollars (2023 Grand View Research Inc. investigation). Most polyurethane is currently synthesized by means of reacting diisocyanate with diol (FIG. 1, reaction (a)). However, isocyanate compounds are highly toxic, and the tightening of regulations on the use of diisocyanate are progressing recently, particularly in the EU, because of health and environmental concerns. In recent years, active research is proceeding into the synthesis of polyurethane without using isocyanate compounds with a view to implementing a sustainable society. However, most of current methods have low utility, high environmental costs, and the quality of the derived polyurethane is low as well as being expensive, and are not practicable because of the variety of problems associated with them.
In this background, Kobe University Associate Professor Tsuda and AGC, with the support of funding from the JST A-STEP program, combined their efforts to jointly develop a novel polyurethane synthesis method (FIG. 1, reaction (b)). University-industry cooperation between the research group of Associate Professor Tsuda, pioneers of the Photo-on-demand organic synthesis method (http://www2.kobe-u.ac.jp/~akihiko/index.html）and AGC, a manufacturer of fluorinated compounds and polyurethane raw materials, created a new academic field and industrial activity based on the development of a new polyurethane synthesis method and functional materials.
Content of the research
A variety of fluorinated biscarbonates (BFBC) were synthesized (FIG. 2) by a condensation reaction of fluorinated carbonates, synthesized in the photo-on-demand synthesis method from fluorinated alcohols and chloroform, with diols. The BFBC generated could be purified by merely drying the derived sample solution at reduced pressure, enabling the quantitative derivation of the target substance by a simple operation.
The synthesis of a non-isocyanate polyurethane (NIPU) with an average molecular weight in excess of 10,000 was achieved by polycondensation of the derived BFBC with diamine. The NIPU synthesized without solvent was only slightly discolored at over 120°C, and that discoloration was not observed up to 100°C. On the other hand, if a solvent is used, it can be polymerized at a lower temperature, and a high molecular weight colorless NIPU is derived at a high-yield. They were able to form a highly-elastic colorless and transparent polyurethane by an appropriate combination of BFBC and diamines in hard and soft segments (FIG. 3, Reactions (1) and (2)). They also succeeded in synthesizing a novel fluorinated polyurethane which is a colorless transparent oil (FIG. 3, Reaction (3)).
The variety and types of polyurethane synthesized, with a range from general purpose to specific applications, have the following benefits when compared to the previously reported synthesis methods of NIPU:
- Any NIPU can be synthesized which employs commercially available diols or diamines employed in the industrial manufacture of polyurethane by the isocyanate method, or which was originally used in the synthesis of NIPU.
- This is a synthesis method which does not use organic bases, metallic catalysts or solvents in the synthesis, such that a high quality NIPU can be derived which does not contain any of them.
- The average molecular weight and terminal functional groups can be controlled by the admixture ratio of BFBC and the diamines. An NIPU prepared by this method with the molecular weight of the order of 10,000 can be employed as a prepolymer in order to synthesize even larger polymers or networked polymers.
- The reagents, solvents and eliminated fluoroalkyl alcohols can basically be recovered, and be re-utilized in the synthesis of these NIPU.
Future perspectives
The conventional polyurethane synthesis method using isocyanate has advantages from a cost perspective. However, the novel and useful non-isocyanate polyurethane (NIPU) synthesis method using these newly developed fluorinated carbonates and fluorinated biscarbonates can replace several conventional methods with a view to implementing a sustainable society, in addition to enabling the creation of functional polyurethanes which conventional methods cannot synthesize. Research is proceeding at present, both from an academic and industrial perspective, with a view to bringing this process to market.
Examples of Synthesizing Non-Isocyanate Polyurethanes (NIPUs) Reported in This Study
Synthesis of Fluorinated Biscarbonates (BFBC)
Examples of Synthesizing Non-Isocyanate Polyurethanes (NIPUs) Reported in This Study
CREDIT
TSUDA Akihiko
Acknowledgements
This research was in receipt of funding support from the Japan Science and Technology Agency (JST) Adaptable and Seamless Technology Transfer Program through Target-driven R&D (A-STEP), University-industry Cooperative phase results promotion research topic: "The development of high-functionality/high-added-value polyurethane materials by means of a safe manufacture process involving the inclusion of fluorinated carbonates as a key intermediate" (Project name: AGC Inc., Project representative:Takashi Okazoe, Research Representative: Akihiko Tsuda)
Patent Information
Title of the patent: Manufacture method of polyurethane
Japanese Patent Application: JP2020-83148, Patent Application date: May 11, 2020
International Patent Application：PCT/JP2021/17511, Patent Application date: May 7, 2021
Laid-open publication：WO 2021/230151 A1 [Nov. 18, 2021]
Inventors: TSUDA Akihiko, OKAZOE Takashi, WADA Hiroshi, TANAKA Hideaki, SUNAYAMA Yoshitaka, KAKIUCHI Toshifumi
Patent Applicants: Kobe University and AGC Inc.
JOURNAL
Bulletin of the Chemical Society of Japan
METHOD OF RESEARCH
Data/statistical analysis
SUBJECT OF RESEARCH
Not applicable
ARTICLE TITLE
Non-Isocyanate Polyurethane Synthesis by Polycondensation of Alkylene and Arylene Bis(fluoroalkyl) Bis(carbonate)s with Diamines
ARTICLE PUBLICATION DATE
21-Jul-2023
No comments:
Post a Comment