Friday, September 08, 2023

NEVADA
American Lithium trades higher as it continues to refine PEA flowsheet

Staff Writer | September 7, 2023 | 

The TLC project, located near the regional hub and county seat in the town of Tonopah, Nevada. Image courtesy of American Lithium

American Lithium’s (TSXV: LI; NASDAQ: AMLI) shares closed 10.9% higher on Wednesday with a C$412 million ($301m) market capitalization following results of optimization work to improve the chemical process used to produce lithium carbonate at its TLC project in Nevada.


The ongoing work is focused on leaching conditions and lithium recovery from the TLC claystones, minimizing lithium losses during neutralization and magnesium sulphate crystallization, and on increasing the product’s purity in the precipitation stage.

According to American Lithium, its test work has been ongoing on the TLC flowsheet since the project’s preliminary economic assessment was published earlier this year. The testing is being done at TECMMINE facilities in Lima, Peru, with technical input on test conditions from DRA Pacific.

The leach conditions have been optimized using sulfuric acid leaching at 50°C achieving 95% lithium extraction in a 2-hour leach cycle with 495 kg/t acid consumption. This, the company said, lowers the leaching temperature conditions from 90°C used in the PEA, with comparable extraction.

These leach parameters resulted in lower acid consumption, which translates into lower limestone consumption during the pre-neutralization phase and a reduction in lime requirements during the neutralization stage, it added.

Magnesium sulfate crystallization was improved resulting in 68% total magnesium recovery and minimizing lithium losses to 1.1% during this impurity removal phase.

The final lithium recovery through the entire hydrometallurgical process achieved in this single test is 84.8% with the highest lithium carbonate purity achieved to date from TLC claystone processing test work.

A final calculated LC purity of 99.59% lithium carbonate equivalent was attained through the new optimized leach process.

“The flowsheet continues to be refined with improvements and results that should improve on the already robust $3.28 billion NPV for the project highlighted in the company’s maiden PEA,” Simon Clarke, CEO of American Lithium, commented.

“We are able to make strong, rapid progress utilizing the expertise of TECMMINE in Peru, ANSTO in Australia and DRA Global, our lead engineers to drive TLC through the prefeasibility process.”

As outlined in the February 2023 PEA, the TLC project is envisioned to be a truck and shovel open-pit operation that would initially produce 24,000 tonnes of LCE annually before doubling to 48,000 tonnes in year seven. After 20 years the mine would process a stockpile of ore with more than 1,000 parts per million (ppm) lithium for another two decades.

No comments:

Post a Comment