Tuesday, April 23, 2024

 

More economical and sustainable rechargeable batteries



Ultralow-concentration electrolyte for lithium-ion batteries



WILEY





Lithium salts make batteries powerful but expensive. An ultralow-concentration electrolyte based on the lithium salt LiDFOB may be a more economical and more sustainable alternative. Cells using these electrolytes and conventional electrodes have been demonstrated to have high performance, as reported by a research team to the journal Angewandte Chemie. In addition, the electrolyte could facilitate both production and recycling of the batteries.

Lithium-ion batteries (LIBs) provide power to smartphones and tablets, drive electric vehicles, and store electricity at power plants. The main components of most LIBs are lithium cobalt oxide (LCO) cathodes, graphite anodes, and liquid electrolytes that deliver mobile ions for the decoupled cathode and anode reactions. These electrolytes determine the properties of the interphase layer that forms on the electrodes and thus affect features such as battery cycling performance. However, commercial electrolytes are still mostly based on a system formulated over 30 years ago: 1.0 to 1.2 mol/L lithium hexafluorophosphate (LiPF6) in carboxylic acid esters (“carbonate solvent”). Over the last ten years, high-concentration electrolytes (> 3 mol/L) have been developed, increasing battery performance by favoring the formation of robust inorganic-dominated interphase layers. However, these electrolytes have high viscosity, poor wetting ability, and inferior conductivity. The large amounts of lithium salts required also make them very expensive, often a critical parameter for feasibility. To reduce costs, research has also begun into ultralow-concentration electrolytes (< 0.3 mol/L). The drawback for these has been that the battery cell decomposes more solvent than the few salt anions, which leads to an organic-dominated and less stable interphase layer.

A team led by Jinliang Yuan, Lan Xia, and Xianyong Wu at Ningbo University (China) and the University of Puerto Rico-Rio Piedras Campus (USA) has now developed an ultralow-concentration electrolyte that may be suitable for practical application in lithium-ion batteries: LiDFOB/EC-DMC. LiDFOB (lithium difluoro(oxalato)borate) is a common additive and significantly cheaper than LiPF6. EC-DMC (ethyl carbonate/dimethyl carbonate) is a commercial carbonate solvent. The electrolyte has a potentially record-breaking low salt content of 2 weight percent (0.16 mol/L) but a sufficiently high ionic conductivity (4.6 mS/cm) to operate a battery. In addition, the properties of the DFOB anions allow for the formation of an inorganic-dominated, robust interphase layer on LCO and graphite electrodes, resulting in outstanding cycling stability in half and full cells.

While the LiPF6 in current use decomposes in the presence of moisture, releasing highly toxic and corrosive hydrogen fluoride gas (HF), LiDFOB is water- and air-stable. Instead of strict dry room conditions, LIBs with LiDFOB can be made under ambient conditions—an additional cost-saving feature. Recycling would also be significantly less problematic and lead to more sustainability.

(3174 characters)

About the Author

Dr Lan Xia is an Associate Professor at Ningbo University and has been working in the rechargeable batteries area for over 15 years. Her research focuses on the smart thermal-responsive strategies for lithium-ion batteries as well as design, synthesis and characterization of potential electrolyte solvents and electrolyte additives for batteries.

No comments:

Post a Comment