Development of large area, organic solar cell printing technology
Development of polymer additives to solve the performance degradation of large-area solar cells based on the solution process. Future expectations regarding solar cell technology commercialization that can be applied in printing technology
Peer-Reviewed PublicationIMAGE: (LEFT) HIGH-EFFICIENCY, HIGH-STABILITY, ORGANIC SOLAR MODULE INCORPORATING TERNARY PHOTOACTIVE LAYERS. (RIGHT) PERFORMANCE OF THE HIGH-EFFICIENCY, HIGH-STABILITY, ORGANIC SOLAR MODULE INCORPORATING TERNARY PHOTOACTIVE LAYERS view more
CREDIT: KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY (KIST)
Solar cell technology is a prominent clean energy source. In particular, organic solar cells, part of the third generation of solar cells, are gaining attention as a core technology for urban solar ray energy generation as they can be printed and applied to exterior walls or glass windows of buildings. However, the photoactive area that absorbs sunlight and converts it to electricity remains significantly smaller than 0.1 cm². Additionally, commercialization is obstructed by performance and reproducibility problems that occur when expanding the cell area to several m2 where practical energy supply levels are available.
A research team led by Dr. Hae Jung Son of the Advanced Photovoltaics Research Center at the Korea Institute of Science and Technology (KIST; President: Seok-Jin Yoon) discovered the factors causing performance degradation in large-area organic solar cells and announced the development of a new polymer additive material for large-area, organic solar cell technology development.
The research team focused on the photoactive layer’s compositional form in organic solar cells and the solution process, which is a part of the organic solar cell manufacturing process. The spin coating method, a solution process mainly used in the laboratory research stage, creates a uniform photoactive layer mixture as the solvent evaporates rapidly while the substrate rotates at a high speed. However, the large-area, continuous solution process designed for industrial use caused solar cell performance deterioration because the solar cell material solution’s solvent evaporation rate was too slow. Consequently, unwanted aggregation between the photoactive materials can be formed.
The research team developed a polymer additive that can prevent this phenomenon by interacting with materials prone to aggregate. As a result, ternary photoactive layers containing polymer additives were fabricated to prevent aggregation in photoactive layers. Additionally, owing to possible nano-level structure control, solar cell performance improvements and stability security are acquired against light-induced temperature increases during solar cell operation. A 14.7% module efficiency was achieved, resulting in a 23.5% performance increase compared to that of the conventional binary system. Efficiency and stability were simultaneously demonstrated by maintaining over 84% initial efficiency for 1,000 hours, even in an 85℃ heated environment.
KIST’s Dr. Son stated, “We have gotten closer to organic solar cell commercialization by proposing the core principle of a solar cell material capable of high-quality, large-area solution processing,” further expressing that “commercialization through follow-up research will make eco-friendly self-sufficient energy generation possible that is easily applicable to exterior building walls and automobiles and also utilized as an energy source for mobile and IoT devices.”
CAPTION
high-efficiency, high-stability organic solar module
CREDIT
Korea Institute of Science and Technology (KIST)
###
KIST was established in 1966 as the first government-funded research institute in Korea to establish a national development strategy based on science and technology and disseminate various industrial technologies to promote the development of major industries. KIST is now elevating the status of Korean science and technology through the pursuit of world-leading innovative research and development. For more information, please visit KIST’s website at https://eng.kist.re.kr/kist_eng_renew/
This study was supported by a KIST institutional program and National R&D Program through National Research Foundation of Korea funded by the Ministry of Science and ICT (Minister: Dr. Jong-Ho Lee). The results of this study were published in the latest issue of Nano Energy (IF:17.881, top 4.641% in JCR), an international scientific journal in the energy field.
JOURNAL
Nano Energy
ARTICLE TITLE
Important role of alloyed polymer acceptor for high efficiency and stable large-area organic photovoltaics
No comments:
Post a Comment