Friday, January 05, 2024


Adventures on VIA Rail: The Last ‘Budd Train’

Written by David Peter Alan, Contributing Editor
image description

KReiss/Wikimedia Commons

Fourth in a Series: There was something special about the Rail Diesel Cars (RDCs) built by the Budd Company in the middle of the past century. They were self-contained passenger cars (and some baggage cars, too) that ran on many railroads in Canada, the Northeastern United States and elsewhere. They had a unique “feel” as they rode, as well as an equally unique sound as the on-board diesel engines revved up, just before the train (sometimes as a single car, and sometimes coupled with other RDCs) started moving.

RDCs were used for commuter-length runs, corridor-length trips on lightly-patronized lines, and even for long trips where they replaced once-famous trains until those runs were discontinued. From the 1950s onward, they were seen and heard (yes, their engines were loud) on railroads from the Boston & Maine to Trinity Railway Express, and from the Northwestern Pacific to the Canadian Pacific. Today there are a few in service on certain tourist railroads, and there is one scheduled route where they run three times a week in each direction, year-round.

That route hosts VIA Rail Trains 185 and 186, formerly officially named the Lake Superior, but which the people along its route affectionately remember as the “Budd Train.” It is the only train on VIA Rail that runs on historic CP track (the signs have been changed to say “CPKC”), except for a few short stretches of the transcontinental Canadian. It runs between White River and Sudbury, Ontario, on a segment of the original Canadian route, from the days when CP Rail operated the train. It is isolated from any other passenger routes, and White River is a long way from other places.

Getting There from Winnipeg

My trip to ride the Lake Superior started in Winnipeg, at a dark and dingy bus station on Sherbrook Street, on the south side of the city. At one time, there were several bus routes that called at Manitoba’s capital, most of which were operated by Greyhound Canada, which suspended service west of Ontario in 2018 and went out of business completely in 2021. The few buses from Thompson do not stop at that location, so only eight buses per week do. One is a weekly bus to Regina, Saskatchewan operated by Rider Express. The other is a daily bus to Thunder Bay, Ontario, run by Ontario Northland, the bus company affiliated with the railroad of the same name.

My bus left on Monday, Aug.14 at 12:30 PM and ran on a highway loosely parallel to the CP main that once hosted such trains as the Canadian and the Dominion. The bus stopped near several places that once had CP stations and trains, like Kenora and Fort Francis on the 11-hour trip to Thunder Bay. Kenora was the most interesting place on the route. My bus wound its way through downtown after providing an opportunity to see a bit of the Lake in the Woods, where the Minnesota border juts north, making it the northernmost place in the United States south of Alaska. The rest of the stops were not that interesting, but they included a couple of convenience stores that had decent snacks (including an “assorted sandwich”; Manitoba’s name for a smaller version on a round roll of the sandwich we call a “sub”). After a one-hour layover near Thunder Bay, it was time to change to a bus bound for Sault Ste. Marie, (“the Soo”), which stopped at White River about 6:00 on Tuesday morning on its way there.

The Northwest End of the Line

The bus was due at White River at 6:00 AM, while the train was scheduled to leave at 7:00 AM from the station located about a 20-minute walk from the bus stop. The options were to spend an extra day in Winnipeg and take a chance on being stranded for two days in White River (and probably blowing the rest of my itinerary), or playing it safe by spending 25 hours in White River. I chose the latter option, which meant all day Tuesday there. I had booked a room at the Continental Motel, where the train crew also stayed. My first stop was a doughnut shop across the road, a lightly used stretch of the Trans-Canada Highway, so the day began with coffee and an opportunity to meet the local seniors, some of whom had worked on the railroad. After that, it was time to see the town, and there was not much to see. Many businesses and all the restaurants had moved away from the town’s residential area, and over to the highway.

There were still a few businesses left in the older part of town, including a food store. The train station was there, too, but it was closed, and there was no waiting room or station agent. The White River Heritage Museum was open, though, and it provided an opportunity to learn about the town and its history. The museum also featured an exhibit about the town’s most-famous character, Winnie-the-Pooh. A veterinarian from an Army cavalry unit bought a bear cub from a trapper at the White River train station and took the bear with him when he went overseas to fight in 1914. He named the bear Winnie, for his home town, Winnipeg. Winnie ended up as a popular attraction at the London Zoo, and writer A.A. Milne bought a stuffed bear modeled after Winnie for his son Christopher Robin Milne. The rest is literary history. The town also has a Winnie-the-Pooh Park, a restaurant affiliated with the Continental Motel, and a lunch truck that sold decent fish and chips. All in all, there was not much to do in White River. The town takes pride in being the coldest place in Ontario, too, but not in August.

Riding the “Budd Train”

Several passengers who were riding the train stayed at the motel, and the owner provided a ride to the station for the crew, returned to the motel, and took us passengers to the station in time for the 7:00 AM departure. The train itself consisted of three cars: one each from the classes RDC-1, RDC-2, and RDC-4. The latter was a full baggage car. Tthe RDC-1 was a standard coach of its type with a 90-passenger capacity. The RDC-2 was a combine with a capacity of 70 passengers and a baggage compartment. It pulled up to the station, and about 20 riders got on. The interior sported a 1970s style, complete with an array of pastel colors. Curtis, who oversaw the train, had coffee available for us and a few snacks, although the lack of food was not as serious a problem on that train as it had been on those that took several days to complete their trips. There would be more to eat later, in Sudbury.

The route included two intermediate station stops where the old Canadian on CP Rail used to call: Chapleau and Cartier, in addition to the final stop at Sudbury. The entire trip took somewhat more than eight hours. As with other trains on VIA Rail, there were several stops at remote settlements. Even if there were no passengers getting on or off, the baggage man delivered and picked up items from or for the baggage car at few of those places. Within that car were several storage bins, stacked on top of each other and aligned in rows. They were marked, and it was clear who the recipients were. While the flag stops at remote places were also a feature of the other VIA Rail “Adventure” routes, the unique sound, smell and feel of the old Budd cars created a sense of nostalgia that pervaded the trip.

The scenery was similar to that on the current Canadian east of Winnipeg: lakes and woods, and more of the same. Yet the sound of the RDC cars and the feel of the way they speed up or slow down is unique, and it is not available anywhere else in North America on a scheduled train. Some of the riders were railfans who had also come a long distance to ride the train.

Shortly after 3:00, the train pulled into Sudbury, where it terminated. Riders got off and on along the way, but the number who alighted at Sudbury was approximately the number who had initially boarded at White River. The Sudbury station is one of the few truly historic buildings in town, but it has not been restored to its original glory. At one time, it was a major stop for the CP transcontinental trains, the place where the Toronto section joined or split from the Montreal section, depending on the direction. The Montreal section stopped at Ottawa, too. Those days are long gone, and today the Sudbury station stands as a rundown shadow of its former self. At least it still hosts a passenger train.

August 1970: CP Rail’s flagship train, the Canadian, departs Toronto Union Station for Sudbury, where it will meet with the section from Montreal. From thence, it will follow a southern route along the north shore of Lake Superior to Thunder Bay. From there it will proceed to Winnipeg, Regina, Calgary and Vancouver. Robert Taylor/Wikimedia Commons.

A Good Railroad Museum

Sudbury is a small city that once boasted a lot of railroad activity. There are CPKC through freights, and the VIA Rail “Budd Train” still goes to White River or arrives from there, the last vestige of the old CP Rail Canadian on its original route. The town itself started as a CP railroad town, and its growth was fueled by lumber, with copper and nickel mining. A “big nickel” stands on the grounds of the Science North Museum to commemorate that history. Not much more of the city’s history is visible in the downtown area. It appeared that much of it had been bulldozed or altered into oblivion. So, sadly, Sudbury’s downtown core did not have much to see, and its museums were not nearby.

Capreol is located northwest of downtown Sudbury, and was one of the towns that was absorbed into “Greater Sudbury” in 2001. Operationally, it was Sudbury’s counterpart on CN, where the Montreal and Toronto sections of the transcontinental trains like the Continental Limited and the Super Continental split or joined, depending on direction. Capreol still hosts VIA Rail’s Canadian twice a week in each direction, and it was the destination of the ticket agent who had welcomed Train 185 on Wednesday afternoon. He had to leave quickly to be on hand to open the Capreol station for Train 1.

Canadian National FP9 6507 with Train 2, the Super Continental coming into Pembroke, Ontario, Sept. 6, 1965. Marty Bernard/Wikimedia Commons.

The next morning, it took about 45 minutes to get to Capreol from downtown Sudbury on a Greater Sudbury Transit (GOVA) local bus. I had added Capreol as my Thursday stop only the prior evening, when I learned that the Northern Ontario Railway Museum would be open. The museum is located in a railroad Superintendent’s house built in 1916, also one of the few buildings that has retained its historic appearance. The house contains exhibits about local railroading, the CN main that goes through there, mining, lumbering and other aspects of Capreol’s history and culture. The railroad collection, located behind the house, includes a CN Mountain class steam locomotive, a boxcar that had been converted into a small house for a railroad worker and his wife during the 1930s, and other equipment and tools. Probably the most interesting car in the collection is a “school car” that served remote towns along the line. It contained a classroom, a small library and living quarters for the teacher and his wife. He taught all grades, from first grade to a few basic college-level courses to the children in the towns on his circuit, as well as adult education in the evening.

Capreol’s other museum, the Heritage Centre, is located one block away, in a now-retired firehouse. It contains a fire engine and other firefighting memorabilia, more artifacts that tell the history of the town, and a large model railroad layout downstairs. It took about three hours to see both museums, and slightly more than another hour to take a quick walk around town and have lunch at the eatery where the locals go. From there, the director of the museum, with whom I also had lunch, gave me a ride to the Sudbury station for Ontario Northland buses. It is not located near downtown Sudbury, but it hosted one departure a day toward Ottawa, my next destination. The ride was not as scenic or interesting as the one from Winnipeg to White River, but it was not as long, either. The bus left about 2:45 and arrived at the VIA Rail station in Ottawa on schedule, at 10:30 PM.

Canada’s Capital

I have already reported on the transit I rode in Canada, so I will concentrate on my destination cities in this article. Ottawa’s new Confederation Line light rail took me to within walking distance of my accommodation for the night. The next day I rode the entire line by daylight, ending up back at the train station for my trip to Montreal.

In the meantime, I took a look at the city, focusing on downtown Ottawa. Like many cities, it has historic buildings interspersed with newer, less-interesting structures. There are some famous places to see: the Byward Market, the Chateau Laurier Hotel, and the bridge over the Rideau Canal (which is a popular spot for ice skating in the winter). It was not possible to see the Parliament buildings because of construction. They were not even fully in use, since the Senate was temporarily using the historic Union Station building (the current station is several miles away but is served by the Confederation Line). Because there were no tours of the Parliament buildings available, I saw the Supreme Court Building instead. Ottawa does not have a particularly strong food scene, although shwarama, the Arab counterpart to the Greek gyro, is a popular favorite.

There is more to see in Ottawa, including museums, but they will have to wait for another visit to the city. Service on VIA Rail is not one of the city’s great attractions. There is relatively frequent service to and from Toronto and fewer trains to and from Montreal, but there are no other lines that serve the capital city. There were trains directly from New York City on the New York Central at one time, but that was before most of us were born.

The last train left for Montreal at 5:50 PM, and I was on it. It was one of the first trips from Ottawa that ran with the new Siemens Venture cars instead of VIA Rail’s old corridor fleet. I did not find the  comfortable. They were fixed and did not recline at all, there were no footrests, they were narrow (or at least they felt that way), there was not much leg room, and half of the seats faced backwards. In short, they were similar to the equipment that Brightline runs in Florida and Amtrak has introduced on its Midwest routes centered on Chicago. The train was packed, and I boarded early enough to get a forward-facing window seat, but the trip had the comfort level of a “commuter” train. It took slightly more than two hours to get to Montreal; about the length of the Long Island Rail Road’s East End trips, NJ Transit’s longest journeys, and many of the longer trips in the Los Angeles area on Metrolink.

I spent the next day (Friday) in Montreal, riding local transit and sampling local foods, as I reported previously. I had to be home in New Jersey for a while to attend to civic matters and catch up on writing for Railway Age. Amtrak’s Adirondack had been suspended for the summer, so I had no choice but to take a bus. New York Trailways ran an overnight bus, so I got home on Saturday morning, Aug. 19. It could have been worse. One of the few routes that Greyhound still operates to Canada is the route between Montreal and New York, so there is still a choice of buses between those endpoints.

I still had more places to go in Canada, including plans to ride the two remaining VIA Rail lines in Quebec, and the Ocean to and from Halifax, Nova Scotia. That trip would take place at the end of August and the beginning of September. I will report on the trains that serve the remote areas of northern Quebec in the next article in this series. In the meantime, I will have a feature on the “Budd cars” and their influence on passenger railroading during their heyday more than a half-century ago.

David Peter Alan is one of America’s most experienced transit users and advocates, having ridden every rail transit line in the U.S., and most Canadian systems. He has also ridden the entire Amtrak and VIA Rail network. His advocacy on the national scene focuses on the Rail Users’ Network (RUN), where he has been a Board member since 2005. Locally in New Jersey, he served as Chair of the Lackawanna Coalition for 21 years, and remains a member. He is also Chair of NJ Transit’s Senior Citizens and Disabled Residents Transportation Advisory Committee (SCDRTAC). When not writing or traveling, he practices law in the fields of Intellectual Property (Patents, Trademarks and Copyright) and business law. Opinions expressed here are his own.

Tags: 

 

Indian PM dedicates demonstration reprocessing plant

04 January 2024


The Demonstration Fast Reactor Fuel Reprocessing Plant (DFRP) is a precursor to large-scale plants for the reprocessing of fast reactor fuel.

The project was one of several dedicated to the nation by Modi during his visit to Tamil Nadu (Image: X/@DAEIndia)

Prime Minister Narendra Modi ceremonially dedicated the DFRP, at the Indira Gandhi Centre for Atomic Research (IGCAR) in Kalpakkam, to the nation on 2 January.

The facility - which has cost INR400 crore (about USD48 million - 1 crore is 10 million) to develop - is the first industrial-scale plant in the world that is capable of handling both carbide and oxide spent fuels from fast reactors, according to India's Department of Atomic Energy. The Indian-designed facility will serve as a precursor to large-scale commercial fast reactor fuel reprocessing plants.

Fast reactors are part of India's vision for a closed nuclear fuel cycle and making use of its abundant reserves of thorium. IGCAR is home to the MWt Fast Breeder Test Reactor (FBTR), in operation since 1985. Work on a 500 MWe prototype fast breeder reactor - the PFBR - began at Kalpakkam in 2004; in August last year, Minister of State Jitendra Singh told the Lok Sabha that the unit was undergoing "integrated commissioining".

In 2017, IGCAR awarded Hindustan Construction Company a contract worth INR 7.64 billion to construct the Fast Reactor Fuel Cycle Facility (FRFCF) to reprocess used fuel from the PFBR.

Researched and written by World Nuclear News

 

China approves construction of four new reactors

03 January 2024


The construction of two Hualong One reactors at each of the Taipingling and Jinqimen sites was approved by China's State Council at a 29 December meeting. Meanwhile, various milestones have been reached in the construction of other Chinese units.

The construction site of units 1 and 2 at the Taipingling site (Image: CGN)

At the meeting of the Standing Committee of the State Council, chaired by Chinese Premier Li Qiang, approval was granted for units 3 and 4 at China General Nuclear's (CGN's) existing Taipingling nuclear power plant in Guangdong province, as well as units 1 and 2 at China National Nuclear Corporation's (CNNC's) new Jinqimen nuclear power plant in Zhejiang province.

The Taipingling plant will eventually have six Hualong One reactors. The construction of the first and second units began in 2019 and 2020, respectively. Unit 1 is scheduled to start up in 2025, with unit 2 following in 2026.

Cold functional tests began at Taipingling 1 on 22 December, CGN announced. The tests mark the first time the reactor systems are operated together with the auxiliary systems. Cold functional tests are carried out to confirm whether components and systems important to safety are properly installed and ready to operate in a cold condition. The main purpose of these tests is to verify the leak-tightness of the primary circuit and components - such as pressure vessels, pipelines and valves of both the nuclear and conventional islands - and to clean the main circulation pipes.

Units 1 and 2 of the Jinqimen plant - which CNNC notes have been included in the national plan and have undergone a comprehensive safety assessment review - have also been approved. CNNC subsidiary CNNC Zhejiang Energy Co Ltd will be responsible for project investment, construction and operations management of the new plant.

On 31 July last year, China's State Council approved the construction of six nuclear power units: units 5 and 6 of the Ningde plant in Fujian Province; units 1 and 2 of the Shidaowan plant in Shandong Province; and units 1 and 2 of the Xudabao plant in Liaoning Province. The latest approvals bring the total number of nuclear power projects approved in 2023 to ten, the same number approved in 2022.

Construction milestones


The Hualong One design features a double-layered containment structure. The main function of the containment building is to ensure the integrity and leak tightness of the reactor building, and it plays a key role in the containment of radioactive substances.


Installation of the inner dome at Changjiang 4 (Image: CNNC)

CNNC announced that the inner dome of the containment building of unit 4 at the Changjiang plant in Hainan province and the outer dome of unit 2 at the Zhangzhou plant in Fujian province were hoisted into place on 27 and 28 December, respectively.


Hoisting of the outer dome at Zhangzhou 2 (Image: CNNC)

Meanwhile, the reactor pressure vessel of unit 3 of the Sanmen plant in Zhejiang province was hoisted into place on 25 December. The "open-top method" was used, which involved using a 2600-tonne crane to install the vessel - weighing more than 271 tonnes - prior to the dome of the containment building being hoisted into place.


The reactor pressure vessel is move into place at Sanmen 3 (Image: SNERDI)

The first safety-related concrete was poured for the nuclear island of Sanmen 3 on 28 June, marking the official start of its construction. Phase II (units 3 and 4) of the Sanmen plant - which already houses two operating Westinghouse AP1000 units - will comprise two CAP1000 reactors, the Chinese version of the AP1000. The units are scheduled to start up in 2027 and 2028, respectively.

Researched and written by World Nuclear News

 

IAEA welcomes action on back-up power at Zaporizhzhia

04 January 2024


The International Atomic Energy Agency (IAEA) says a new system to ensure an immediate supply of back-up electricity if the main external line fails is a significant safety development - but has also outlined a list of areas of the Zaporizhzhia nuclear power plant its experts want to inspect.

IAEA teams have been on site since September 2022 (Image: IAEA)

IAEA Director General Rafael Mariano Grossi said that frequent external power cuts - there have been eight since August 2022 - remained a "source of serious concern for safety and security" because electricity is required to cool its reactors and other essential functions.

The plant, on the frontline of Russian and Ukrainian forces, has just the one remaining 750 kV line, with one 330 kV back-up power line. But since mid-2023, the IAEA says, the back-up line has needed manual intervention to become operational. The IAEA says that work has now been carried out at the plant on back-up electrical transformers which, Grossi said: "Means that if the main power supply through the 750 kV switchyard is lost, the back-up line will automatically be able to provide electricity to the plant without manual, and hence delayed, intervention, provided it remains operational."

He added: "This is a significant development, as it enables independence and redundancy in the site’s power supply scheme, even though the overall off-site power situation ... remains extremely fragile. This solution will only be effective if the 330 kV power line remains available, which, as we know from experience, is far from guaranteed."

In the first update of the new year, the IAEA also detailed its requests for more access at the site, which has been under Russian military control since early March 2022. It said its experts stationed at the plant were still awaiting access to the rooftops of reactors which had been planned for 19 December, and it said "access to some parts of the ZNPP’s turbine halls continues to be restricted, including those areas of reactor units 3, 4 and 6 over the past week".

For the past two weeks, the agency says, its team has not been allowed to access the reactor halls of units 1, 2 and 6 - "the first time that IAEA experts have not been granted access to a reactor hall of a unit that was in cold shutdown".

They are also awaiting the maintainance schedule for 2024 and are "closely following developments" regarding boric acid deposits they observed during a walkdown in the containment building of unit 6, which the plant operators said was the result of a leak in one of the boric acid storage tanks. The IAEA said: "This type of leak can occur during the operation of a plant. However, this kind of event requires proper and timely attention, investigation and response from the operator, to prevent further and potentially more severe safety implications."

Progress continues on the installation of four more mobile diesel boilers at the site, to help generate additional steam for various nuclear safety functions. The plant currently has nine mobile boilers, of which at least eight have been operating, providing additional heating during the winter. Five of the six reactors at the nuclear power plant are in cold shut down, with one remaining in hot shutdown, where it produces heat for the plant and the nearby town of Energodar where most of the staff live.

IAEA teams stationed at Ukraine's other nuclear sites of Rivne, Khmelnitsky, South Ukraine power plants and Chernobyl "continue to report that nuclear safety and security is being maintained, despite wide-ranging missile attacks on Ukraine in the past week, which forced the IAEA experts at the Khmelnitsky NPP to take shelter three times". Those stationed at the Rivne plant were informed that a cruise missile flew close to the plant on 29 December.

Researched and written by World Nuclear News

 

Idaho researchers develop reactor digital twin

04 January 2024


A virtual replica of Idaho State University's (ISU's) AGN-201 research reactor, developed in collaboration with Idaho National Laboratory (INL), is claimed to be the world's first nuclear reactor digital twin.

The team checks out a component of the reactor digital twin (Image: INL)

Digital twins are virtual models of real-life assets, such as complex infrastructure, machines or buildings. By modelling nuclear reactors, digital twins allow researchers to understand how certain changes affect the entire system, without making an irreversible change to the physical reactor itself. According to INL, digital twins could save nuclear energy researchers time and money, especially as new, innovative reactors come online.

The AGN-201 digital twin receives real-time data from the actual reactor, then uses machine learning to anticipate its performance. With the digital twin, researchers can interact with the real-world reactor in mixed reality by monitoring data.

"Someday, digital twins of nuclear reactors could allow operators to control the reactor remotely," INL said.

The project began in August 2022 after INL digital engineer Ryan Stewart, an ISU graduate, recommended using the AGN-201 reactor for some of the team's planned demonstrations. The reactor was considered an ideal test bed for this project because it is simple compared with commercial power reactors.

ISU students installed data acquisition equipment in the reactor and developed operation scenarios to test the reactor twin - gaining a unique opportunity to take part in cutting edge research. The lab provided much of the digital engineering support, including data acquisition, cloud streaming, machine learning and mixed reality.

The lab's team presented these results to US Secretary of Energy Jennifer Granholm in May last year.

"The benefits of a nuclear reactor digital twin are enormous," said INL Digital Engineering Manager Christopher Ritter. "Digital twins provide a comprehensive understanding of nuclear fuel cycle facility operations, strengthening nuclear security and non-proliferation efforts."

The AGN-201 reactor - developed in the late 1950s by Aerojet General Nucleonics - began operating at ISU in 1965. This low-power (up to 5 Wt) research reactor is commonly used for both academic and industrial research/experiments, as well as for various testing and training purposes. It is one of five such reactors still operating in the world, two others of which are also in the USA.

Researched and written by World Nuclear News

 

New wetland proposed near Hinkley Point C

04 January 2024


EDF Energy is proposing the creation of more than 800 acres (324 hectares) of saltmarsh on the River Parrett in Somerset, UK, as an alternative to the proposal for 280 underwater speakers to produce an acoustic fish deterrent at the Hinkley Point C nuclear power plant.

The proposed new saltmarsh will be adjacent to the existing Steart Marshes (Image: EDF Energy)

Plans for the saltmarsh - proposed to keep some fish species away from the power station's cooling water system - are being developed with Natural England, Natural Resources Wales and the Environment Agency.

EDF Energy said the proposed saltmarsh - at Pawlett Hams near Bridgwater - would create a new habitat for fish and animals, improve local water quality and help prevent flooding.

It said creating saltmarsh is a proven way to increase and protect biodiversity. It will help fish by providing breeding grounds and provide food and shelter for birds and animals. Tidal marsh also filters and cleans water, prevents floods and locks away carbon "in one of our most effective weapons in the fight against climate change".

Steart Marshes, opposite the proposed new wetland, was created nine years ago and is now teeming with birds, fish and wildlife, and is a popular place for recreation, EDF Energy noted.

The creation of the new habitat to help protect fish populations replaces a proposal to install an acoustic fish deterrent system. This system would use 280 speakers to continuously make loud noises during the plant's planned 60-year operation. The impact of such systems on porpoises, seals, whales and other species is unknown, the company said, adding that independent studies showed it would offer a very small potential benefit to protected fish species. It would also risk the safety of divers in the fast-flowing tides of the Bristol Channel.

There will be a 'fish return' system at the new plant (Image: EDF)

The new saltmarsh is one of a number of proposed measures to help wildlife and the environment around the Severn estuary. These include the planting of seagrass and kelp, developing native oyster beds and removing weirs on three rivers to help migrating fish to reach their breeding grounds.

The proposals for habitat creation and other changes to Hinkley Point C's design - such as alterations to the way the plant will store used nuclear fuel - will be included in a public consultation launching on 9 January.

"The new wetland would be a fantastic place for wildlife and a beautiful place to visit," said Chris Fayers, head of environment at Hinkley Point C. "Using natural and proven ways to improve the environment is better than creating 60 years of noise pollution with a system that is untested far offshore in the fast-flowing waters of the Severn.

"Hinkley Point C is one of Britain's biggest acts in the fight against climate change and its operation will provide significant benefits for the environment."

Hinkley Point C will be the first new nuclear power station to be built in the UK in more than 20 years and will provide about 7% of the country's electricity. Construction of the plant began in December 2018. The first of its two 1630 MWe EPR reactors is scheduled to be connected to the grid in 2027 and the second in 2028.

Researched and written by World Nuclear News

 

Sweden appoints national nuclear power coordinator

05 January 2024


Swedish Energy & Industry Minister Ebba Busch has announced the appointment of Carl Berglöf as national nuclear power coordinator as the country embarks on a programme to expand its nuclear generating capacity. He will support the government in its work to promote new nuclear power.

Ebba Busch (right) announces the appointment of Carl Berglöf as national nuclear power coordinator (Image: regeringen.se)

In October 2022, Sweden's incoming centre-right coalition government adopted a positive stance towards nuclear energy. In November last year, it unveiled a roadmap which envisages the construction of new nuclear generating capacity equivalent to at least two large-scale reactors by 2035, with up to ten new large-scale reactors coming online by 2045.

"In order for new nuclear power to come to fruition, it is important that all relevant actors come together and have a close dialogue about how the expansion can be carried out at the pace needed to meet a growing need for electricity and based on the requirements of the total defense for a robust and resilient energy supply," the government said on 4 December. "The coordinator will be a point of contact for stakeholders and actors in the area and will cooperate with them in order to increase the rate of establishment of new reactors."

Berglöf - who has been a nuclear advisor at the industry organisation Energiföretagen Sweden since 2017 - will take up the position as national nuclear power coordinator on 1 February.

As part of the role, he will be expected to continuously support the government in following up and analysing how the work with the expansion of nuclear power is progressing and identifying the need for supplementary measures. The assignment must be finalised by 31 December 2026 at the latest, the government said.

"The coordinator will have a central role in speeding up the expansion of new nuclear power and pushing for the measures required for the roadmap for new nuclear power in Sweden to be implemented," said Busch.

"I am very honoured to take on the role of national nuclear power coordinator," Berglöf said. "Over the past decade, I have worked in various roles to enable new nuclear power in Sweden, so I feel well prepared for the task. From my previous working life, I bring with me my deep knowledge of the subject, my broad network and my ability to untangle knots." 

Sweden's six nuclear power reactors currently generate about one-third of the country's electricity.

Researched and written by World Nuclear News

 

Nuclearelectrica gets EIB funding for tritium removal facility

05 January 2024


Romania's Nuclearelectrica has secured a loan agreement of EUR145 million (USD159 million) with the European Investment Bank (EIB) towards the completion of what will be Europe's first Tritium Removal Facility, at the Cernavoda nuclear power plant.

The Cernavoda plant is in the southeast of Romania (Image: Nuclearelectrica)

As Candu pressurised heavy water reactors age, tritium - an isotope of hydrogen - accumulates in its moderator and heat transport systems. Increased levels of tritium can significantly contribute to personnel dose rates and emissions levels in the environment. Tritium removal technology is designed to capture and process tritium so that it can be properly stored and recycled, thereby reducing environmental impact, personnel exposure levels and enhancing workplace safety.

The Cernavoda tritium removal facility - the world's third, and the first in Europe - will use technology developed by the Romanian National Research and Development Institute for Cryogenic and Isotopic Technologies, a scientific research and technological development unit under the coordination of the Ministry of Research, Innovation and Digitalisation.

The tritium removal facility will include several high-technology areas: liquid phase isotopic separation, cryogenic distillation and high-vacuum operation. The tritium extracted will be stored in secure and safe specialised containers ready for future use.

The loan agreement was announced on 22 December. Cosmin Ghiță, Nuclearelectrica CEO, said: "Cernavoda Tritium Removal Facility will be the world’s third and Europe’s first tritium removal facility and will give Romania the opportunity to become a European hub for tritium production and export - the fuel candidate of future clean fusion reactors. We are happy to implement a Romanian innovative technology, based on years of research and development, a true statement of Romania's leadership in nuclear industry."

EIB Vice-President Kyriacos Kakouris said: "The EIB is financing sustainable energy projects worldwide and we are glad to support this project with health, safety and circular economy benefits undertaken by an experienced promoter."

The EIB is the long-term lending institution of the European Union and makes long-term finance available for projects pursuing EU policy goals. Its approach to nuclear projects was defined in its Energy Lending Criteria 2013, outlining a technology neutral approach "in line with the European Union’s decarbonisation goal and the objectives of ensuring security of energy supply and competitiveness in an environmentally sustainable, cost-efficient, effective, safe and socially acceptable way".

Cernavoda is the only nuclear power plant in Romania and consists of two 650 MWe Candu-6 reactors. Unit 1 went into commercial operation in 1996 and unit 2 in 2007. Nuclearelectrica plans to extend the operating life of unit 1 to 60 years. Tritium removal facilities are already in operation at Ontario Power Generation's Darlington plant and Korea Hydro & Nuclear Power's Wolsong plant, both home to Candu reactors.

In June Korea Hydro & Nuclear Power signed an engineering, procurement and construction contract worth KRW260 billion (USD200 million) with Nuclearelectrica following a public procurement process. The project completion timeline is estimated to be 50 months.

Researched and written by World Nuclear News

 

South Africa opens draft IRP energy plan for public comment

05 January 2024


The draft Integrated Resource Plan (IRP 2023) setting out how South Africa will seek to ensure security of electricity supply was formally issued by Minister of Mineral Resources and Energy Gwede Mantashe and will be open to public comments until 23 February.

Koeberg (Image: Eskom)

"The purpose of this publication is to solicit public comments on the assumptions, input parameters, scenarios, and observations made," the Department for Mineral Resources and Energy (DMRE) said on X. "Comments submitted will be considered in drafting the final policy adjusted plan which will map out the future energy mix for the country."

The 52-page document has been published in the South African Government Gazette and considers several scenarios and latest developments in the country's electricity industry, DMRE said. It considers two time horizons: the period up to 2030, focusing on addressing prevailing generation capacity constraints and system requirements to close the supply gap; and the period from 2031 to 2050, focusing on long-term electricity generation planning with pathways to achieve a net zero electricity sector by 2050.

South Africa's previous IRP, published in 2019, recognised the need to retain nuclear power in the country's energy mix and supported utility Eskom in pursuing a licence for the long-term operation of the Koeberg nuclear power plant. The plant's life extension is currently being reviewed by the National Nuclear Regulator, the new document notes.

Over the longer horizon, pathways comprising dispatchable technologies with high utilisation factors - including different combinations of nuclear, renewables, clean coal and gas - will provide security of supply as well as supporting carbon reduction commitments, the report finds.

Firm decisions based on system requirements are "crucial", the plan concludes, but final policy decisions "must be taken on the basis of a longterm decarbonisation trajectory" while improving South Africa's competitiveness and economic growth, the IRP concludes.

The DMRE recently confirmed it intends to start the procurement process for 2500 MWe of new nuclear capacity, with plans to issue requests for proposals by March 2024.

Researched and written by World Nuclear News

 

Connection to grid requested for Poland's first plant

05 January 2024


Polish electricity grid operator Polskie Sieci Elektroenergetyczne (PSE) has determined the parameters required for connecting the country's first nuclear power plant, planned in Pomerania, to the national grid.

An illustrative example of how the Pomeranian plant might look (Image: PEJ)

Every quarter, PSE updates the list of companies that have applied for a connection to the national grid. According to the latest list, on 7 December Polskie Elektrownie JÄ…drowe (PEJ) received the conditions for the connection to the grid of a nuclear power plant in the GdaÅ„sk area with a capacity of up to 3720 MWe.

The next stage in the process is the conclusion of a connection agreement between PSE and PEJ - a special-purpose vehicle 100% owned by the State Treasury. The date of concluding the connection agreement and the date of connecting the power plant to the national grid have not yet been determined.

In November 2022, the then Polish government selected the Westinghouse AP1000 reactor technology for construction at the Lubiatowo-Kopalino site in the Choczewo municipality in Pomerania in northern Poland. An agreement setting a plan for the delivery of the plant was signed in May last year by Westinghouse, Bechtel and PEJ. The country's Ministry of Climate and Environment in July issued a decision-in-principle for PEJ to construct the plant. The aim is for Poland's first AP1000 reactor to enter commercial operation in 2033.

The Ministry of Climate and Environment in November last year issued a decision-in-principle for the country's second large nuclear power plant. Two South Korean-supplied APR1400 reactors are planned in the Patnów-Konin region.

Researched and written by World Nuclear News