Friday, October 23, 2026

Building A CERN Beyond Earth Will Take More Than A Bigger Ring – OpEd



The article proposes that space agencies and physics laboratories jointly study the feasibility of a particle collider beyond Earth, noting that a 2022 analysis of an 11,000-kilometer lunar ring suggested proton-proton energies of 14 peta-electronvolts under optimistic assumptions.

It highlights extreme engineering barriers, including an estimated power requirement of about 10 terawatts for synchrotron-radiation compensation—orders of magnitude above planned lunar nuclear reactors—and challenges of cryogenics, thermal control, lunar dust, and machine protection.

The author argues that any such machine would require multinational cooperation, staged technology demonstrations, and a clear scientific case that demonstrates added value over terrestrial projects such as CERN’s Future Circular Collider.


Astronauts flew around the Moon this year, and Europe is deciding on its next great collider. A particle collider beyond Earth could reach energies no terrestrial machine can, but its power, cooling and control problems deserve an open, international study before anyone commits to building one.

In April, four astronauts flew around the Moon on NASA’s Artemis II mission, the first crew to travel there since 1972. China, which tested its new Long March 10 rocket and Mengzhou crew capsule in February, aims to land its own astronauts before 2030. In May, CERN’s governing council named an electron-positron Future Circular Collider its preferred next flagship and said it could decide on the project by 2028.

The return to the Moon and the search for the next great physics machine are usually reported as separate stories. One of the boldest ideas in physics joins them: a particle collider built beyond Earth. Observatories in space already examine the universe. A laboratory beyond Earth could test its fundamental laws at energies no machine on the ground can reach.


The idea deserves a serious feasibility study, carried out by space agencies and physics laboratories together and open to more than one nation. It also deserves candor about how far it remains from a design.


Why bigger rings matter


The appeal starts with a basic relationship in accelerator physics. In a circular proton collider, the attainable beam energy depends on the strength of the bending magnets and the radius of the ring, as Fermilab’s Vladimir Shiltsev explains in a survey of the field’s ultimate limits. A larger ring can reach higher energies without a proportional increase in magnetic field. Space offers room for structures far larger than any tunnel, while changing almost every condition under which they must operate.

In a peer-reviewed study published in 2022, physicists James Beacham and Frank Zimmermann examined a collider roughly 11,000 kilometers around the Moon. Assuming an optimistic 20-tesla magnetic field, it could reach a proton-proton collision energy of 14 peta-electronvolts, about 1,000 times the design energy of CERN’s Large Hadron Collider. The same parameters imply about 8.5 terawatts of synchrotron radiation, and the authors concluded that “a power source at the level of 10 TW would thus appear to be required.”


That number needs context. In 2025, NASA set a goal of launching a lunar nuclear reactor producing at least 100 kilowatts of electricity by 2030. The collider study’s requirement is about 100 million times larger. The gap does not kill the idea, but it defines the first research question: what is the most ambitious machine whose energy needs could credibly be met, and would it answer questions important enough to justify building it?

The scientific motivation is real. The Higgs boson’s properties remain a route to testing the Standard Model of particle physics, and the nature of dark matter remains unknown. Future colliders could search for new particles and interactions as well as subtle deviations in processes already measured. Higher energy widens the territory experiments can explore without promising that anything new waits at the next threshold.

A credible proposal must therefore name specific measurements and estimate the data needed to make them. Energy alone is an incomplete measure of performance. Luminosity, which sets how often a given collision occurs, matters because a rare process may require an enormous sample before it can be separated from background. A machine that reached extraordinary energy but produced too few useful events could disappoint.


Space changes the engineering


The natural vacuum and cold surroundings of some locations beyond Earth look attractive. Their benefits must be weighed against the real operating environment, including sunlight, nearby surfaces, contamination and the heat the equipment itself generates. A general description of space is no substitute for a thermal or vacuum budget.

Cooling shows why. The Large Hadron Collider’s main magnets operate at 1.9 kelvin, colder than outer space, using an extensive cryogenic system. A machine built on comparable magnets would still need active refrigeration on the Moon or in orbit. Sunshields and careful siting could reduce incoming heat, but neither would remove the internal heat loads.


NASA’s thermal-control guidance explains the constraint. A spacecraft’s temperature follows the balance of heat absorbed, generated, stored and rejected, and in vacuum the excess must ultimately be radiated away. For a collider, the power plant, radio-frequency systems, cryogenic machinery and detectors would all add to that load, so the radiators would have to be designed alongside the accelerator. Moving the machine off Earth also leaves synchrotron radiation in place: particles still shed energy whenever their paths bend, and much of the lunar design’s power would go to replacing it.

An orbital facility and a lunar installation would pose different problems. A collider assembled in orbit would have to hold its components in precise relative position to preserve the beam optics. A lunar ring could be anchored to the ground but would demand surface preparation, transport, assembly and maintenance across extraordinary distances. Lunar dust adds a constraint to every exposed system. NASA notes that dust on solar panels reduces available power, obscures camera lenses and coats thermal radiators, raising equipment temperatures. A credible design would also show how a failed magnet, sensor or cooling module could be diagnosed and replaced, and what each repair would cost in lost operating time.

A laboratory that stays under control

A collider concentrates enormous energy in tightly controlled beams. The energy stored in each beam of the Large Hadron Collider reaches up to 364 megajoules, and CERN’s machine-protection literature describes how uncontrolled beam losses can damage equipment unless loss monitors, interlocks and beam-dump systems act in time. A facility beyond Earth would have to demonstrate equivalent protection under its own conditions.

That requirement should shape the role of automation. Software could tune beams, diagnose faults and schedule maintenance, but independent protection systems should keep the authority to stop beam operation when essential conditions fail. A break in communication with Earth should trigger a predetermined safe response suited to the fault and the machine’s state. Those behaviors should be tested early, including recovery from misalignment, degraded cooling and faulty measurements, before stored beam energy is increased.

A machine too large for one nation

The largest physics machines are already beyond the reach of a single country. The Future Circular Collider would run about 91 kilometers and cost about 15.3 billion Swiss francs, or roughly $19 billion, and its backers are looking to countries outside CERN’s membership to help close the funding gap. China’s rival design, the Circular Electron Positron Collider, was left out of the country’s 2026-2030 five-year plan. Its study leader, Wang Yifang, said the team would try again in 2030 unless CERN’s machine is approved first, in which case, he said, “we will seek to join FCC, and give up CEPC.”

A collider beyond Earth would multiply that logic. The Moon is becoming a field of competing programs, with the U.S.-led Artemis partnership on one side and China’s planned lunar research station, developed with Russia, on the other. CERN itself was founded in 1954 so that scientists from nations recently at war could build a shared laboratory. A serious study of a lunar or orbital collider could serve a similar purpose, giving space agencies a joint scientific question whose answer no single program could reach alone.


There is already a model of cooperation between spaceflight and particle physics. The Alpha Magnetic Spectrometer, installed on the International Space Station in 2011, studies cosmic rays in a search for antimatter and dark matter, run by 44 institutions from America, Europe and Asia under joint U.S. Energy Department and NASA sponsorship. A collider would add the far harder task of preparing, accelerating and repeatedly colliding opposing beams, but the institutional template exists.

Build the research path in stages

The next useful step would be a jointly reviewed study comparing terrestrial, lunar and orbital options against the same scientific objectives. It should quantify the required collision sample and detector performance, then estimate power, mass, construction, operations and eventual decommissioning for each. An elegant ring geometry would have to survive that whole-system assessment.

Technology demonstrations should then target the uncertainties that matter most. A compact flight experiment might test precision beam transport or the behavior of an accelerator component in relevant space conditions. Separate demonstrations could show whether superconducting systems, thermal hardware and robotic maintenance can meet their requirements. Each should answer a defined question that improves the next design decision.

The study should also respect the priorities physicists have already set on the ground. CERN’s strategy keeps completion of the high-luminosity upgrade of the Large Hadron Collider as its highest medium-term priority, with the Future Circular Collider as the preferred next flagship. Those are the benchmarks against which any machine beyond Earth must prove its added value.

A CERN beyond Earth could one day become an extraordinary instrument for understanding nature. The case for beginning the study is credible today, and the case for building the facility will have to be earned. The nations now returning to the Moon should decide together what science it is for.


About Burak Oktenli
Burak Oktenli holds an MBA and a Master of Professional Studies in Applied Intelligence from Georgetown University. His research addresses the governance of authority in autonomous and AI-enabled systems, and his writing has appeared at the Modern War Institute at West Point, RUSI, RealClearDefense, RealClearMarkets, and Geopolitical Monitor. He is the author of Authority Architectures for Autonomous Systems, a ten-volume series on how authority in autonomous systems is delegated, monitored and recovered, at authority-architecture.me.
View all posts by Burak Oktenli →


BUILD IT HERE





NO WAR IN SPACE

US Accuses Russia Of ‘Deliberately Reckless’ Move With Military Satellite Flyby

Hundreds of commercial -- and military --- satellites fly in "low earth orbit" -- a crowded section of Earth's outer atmosphere.
 Photo Credit: NASA

October 23, 2026
 RFE RL
By Mike Eckel


Key Takeaways:

US officials accused Russia of deliberately maneuvering the military satellite Kosmos-2612 within an estimated 200 meters of ICEYE-X36, a US-registered commercial satellite operated by Finland’s ICEYE that provides radar imagery to Ukraine, calling the close approach “deliberately reckless” and consistent with an on-orbit weapons operation.

Russia dismissed the US claims as “absurd” during a UN First Committee debate and accused Washington of aggressive military space ambitions, while not directly addressing the specific maneuver.

The exchange followed public remarks by US Air Force Secretary Troy Meink confirming that the United States has deployed on-orbit space-control weapons, a statement some analysts said merely acknowledged capabilities long understood to exist.



US officials publicly accused Russia of threatening a Finnish-operated commercial satellite that provides imagery and intelligence to Ukraine and other nations, calling the move “deliberately reckless.”

In response to the accusations, made during a United Nations debate on October 21, Russia broadly described US claims as “absurd” and accused Washington of its own “aggressive military space ambitions.”


The back-and-forth came days after a Russian military satellite known as Kosmos-2612 moved “dangerously” near to ICEYE-X36, a satellite registered in the United States and operated by a Finnish company called ICEYE.

The Russian satellite came “exceptionally close” — within 200 meters, by some estimates — something that space officials and amateur satellite watchers said was extremely unusual.

“This was not a routine conjunction or ‘fly by,'” LeoLabs, an aerospace intelligence company, told RFE/RL. “The behavior is consistent with sophisticated rendezvous and proximity operations.”

ICEYE-X36 carries a radar technology that can gather detailed terrestrial images, even through cloud cover. The Finnish company in January signed a contract with the Ukrainian Defense Ministry to provide intelligence.

Kosmos-2612 “exhibited threatening behavior by intentionally maneuvering dangerously close to a commercial satellite,” Brian Hardesty, an adviser to the US Delegation to the Conference on Disarmament, said during a meeting in New York of the UN First Committee, a body that debates arms control and disarmament issues. “These behaviors appear consistent with an on-orbit weapons operation.”


“The decision to conduct these activities was deliberately reckless,” he said.

Russia’s representative who could not be immediately identified, did not directly address the assertion.

“We call on member states to give the proper response to the aggressive military space ambitions of the United States,” he said.

He also referenced comments made last month by the secretary of the US Air Force, the top civilian official for that military branch.

Speaking to a conference outside of Washington, Troy Meink’s comments that Washington has in fact deployed actual weapons in space — “on-orbit space control weapons capable of defending the Joint Force against hostile adversary action” — caused a jolt among policy experts.

Other longtime space watchers, however, said, the announcement merely stated publicly what had already been obvious for some time.

“The United States did not suddenly weaponize space by acknowledging that it possesses these capabilities,” wrote Mallory Stewart, a former top arms control secretary at the US State Department. “An arms race in space has been under way for years.”Mike Eckel is a senior international correspondent reporting on political and economic developments in Russia, Ukraine, and around the former Soviet Union, as well as news involving cybercrime and espionage. He’s reported on the ground on Russia’s invasion of Ukraine, the wars in Chechnya and Georgia, and the 2004 Beslan hostage crisis, as well as the annexation of Crimea in 2014.


About RFE RL
RFE/RL journalists report the news in 21 countries where a free press is banned by the government or not fully established.
View all posts by RFE RL →



Japan takes aim at the moons of Mars with French and German technology


Japan has launched a spacecraft to Mars’s two small moons in a mission that could shed light on their mysterious origins. With French and German technology on board, the MMX probe aims to collect material from Phobos and deliver it to Earth in 2031.


Issued on: 20/10/2026 - RFI

Phobos and Deimos, the Martian moons NASA


Japan’s next space adventure has a small, potato-shaped destination – and ambitions that reach far beyond its size.

The Japanese space agency JAXA on Tuesday successfully launched its Martian Moons eXploration mission, or MMX, from the Tanegashima Space Centre aboard an H3 rocket.

JAXA had allowed for further launch attempts until 9 November if necessary. Missing this opportunity could mean waiting roughly another two years for a favourable alignment of Earth and Mars.

The spacecraft is expected to reach the Martian system in 2027 and spend around three years investigating Phobos and Deimos, before returning samples from the larger moon to Earth in 2031.

France and Germany are contributing a small rover, while a French-built infrared instrument will help examine the moons’ surfaces and identify suitable landing sites.

The central question is straightforward: where did these two unusual moons come from?

Phobos, an irregular body measuring about 27 kilometres at its widest point, orbits less than 6,000 kilometres above the Martian surface. Smaller Deimos circles much further out, at an altitude exceeding 20,000 kilometres.

Both could be asteroids captured by Mars’ gravity. Alternatively, they may have formed from debris thrown into space by a massive collision involving the planet.

By examining their composition up close – and bringing material home for laboratory analysis – scientists hope to distinguish between those competing explanations.

Building on Japan’s sample-return successes

Reaching Phobos has defeated previous missions.

In 1988, the Soviet Union launched two spacecraft towards Mars and its larger moon. One reached the Martian system in January 1989 and returned photographs of Phobos, but contact was lost before it could deploy its surface equipment.

Russia tried again in 2011 with Phobos-Grunt, an ambitious sample-return mission carrying a Chinese Mars orbiter. Stranded in Earth orbit after its propulsion system failed to send it towards Mars, the spacecraft eventually fell back into the atmosphere.

Other missions have photographed the moons while exploring Mars, but none has landed successfully on either surface.

Japan, however, brings considerable experience in collecting extraterrestrial material.

Its first Hayabusa spacecraft, launched in 2003, overcame major technical difficulties to return particles from the asteroid Itokawa in 2010.

Hayabusa2, launched in 2014, followed with a more substantial haul from the asteroid Ryugu, delivering its samples to Earth in 2020.

MMX builds on those achievements while attempting something different: rather than briefly touching an asteroid to collect material, the spacecraft will settle on Phobos for sampling operations lasting several hours.

First, it will survey the moon from nearby. The French MIRS infrared imaging spectrometer will map minerals on the surface, providing scientific clues and helping mission teams choose where to land.

Then comes a scouting mission with a distinctly European character.

A rover, two landings and a journey home

Developed by France’s CNES and Germany’s DLR space agencies, the four-wheeled Idefix rover will be released towards Phobos ahead of the main spacecraft’s landing.

It is expected to bounce before coming to rest, potentially in an awkward position. Its mechanisms are designed to turn it upright onto its wheels.

Driving will require exceptional care. Gravity on Phobos is around 1,800 times weaker than on Earth, making even basic movements challenging. The rover must advance slowly and maintain contact with the surface.

Over an operating period of around 100 days, Idefix is expected to cover perhaps 100 metres, examining the terrain and helping engineers understand how the loose surface material behaves.

Those findings will inform the main spacecraft’s descent.

National Centre for Space Studies (CNES) Administrator Philippe Baptiste (L) and Japan Aerospace Exploration Agency (JAXA) president Hiroshi Yamakawa (R) shows to French President Emmanuel Macron a model of a rover developped for the Martian Moons eXploration (MMX) project during the International Paris Air Show at the Paris–Le Bourget Airport on 19 June 2023. AFP - LUDOVIC MARIN

MMX plans two sampling landings, targeting different locations to obtain material that could help reveal Phobos’s origins. Each surface visit is expected to last around two and a half hours.

The goal is to collect at least 10 grams of regolith – the loose dust and fragmented rock covering the moon.

The spacecraft will also make close passes of Deimos before beginning its return journey.

Under the mission timetable, the samples should reach Earth in 2031 inside a protective capsule destined for landing in Australia.

Scientists will examine the recovered material and any gases preserved inside its container. Some samples will be reserved for future research, allowing later generations to study them with instruments yet to be developed.

France will receive a share for its scientific community, with a dedicated conservation and preparation facility planned at the National Museum of Natural History in Paris, according to CNES.

After a five-year journey, just a few grams could provide the clearest evidence yet of how Mars acquired its moons.

This has been adapted from an original article in French by RFI's Igor Gauquelin and lightly edited for clarity.
FRANCE - SLAVERY

France turns page on Code Noir as Parliament approves symbolic repeal

France’s Parliament has unanimously approved the symbolic repeal of the Code Noir and related legislation governing slavery in its former colonies, closing a legal chapter left formally unresolved since abolition in 1848.


Issued on: 21/10/2026 - RFI

French MP Max Mathiasin at a debate over his proposed bill aimed at abolishing the slavery-related laws at the National Assembly, France's lower house parliament, in Paris on 28 May, 2026. AFP - LUDOVIC MARIN

Nearly two centuries after France abolished slavery in its colonies, Parliament has given its final approval to legislation formally repealing the Code Noir – the royal edicts that organised and legitimised the enslavement of people under French colonial rule.

Senators unanimously backed the bill on Tuesday, following an equally unanimous vote in the National Assembly in May. Proposed by Guadeloupe MP Max Mathiasin, the measure targets the royal edict of 1685 and the legislation stemming from it.

The vote comes 25 years after France recognised the slave trade and slavery as crimes against humanity under the 2001 Taubira law.

Its significance is primarily symbolic. The texts governing slavery ceased to have legal effect following abolition in 1848, but had never been expressly repealed. Parliament’s decision clears the way for their formal removal from French legislation.

Closing a colonial legal chapter

The Code Noir reduced enslaved people to the status of “movable property” – possessions that owners could buy and sell.

It also prescribed brutal punishments for those who tried to escape, including branding with a hot iron, mutilation and, for repeated attempts, the death penalty.

Ahead of the Senate vote, Overseas Territories Minister Naïma Moutchou said the repeal would address an unacceptable remnant of France’s colonial past.

“The Code Noir [Black Code] organised and legitimised slavery. It has no place in our legal system, not even as a relic. This text belongs to our history, not our legislation,” she told French news agency AFP.

The bill also requires the government to submit a report on the legacy of colonial law and its lasting effects, particularly in relation to racism, alongside the place given to the history of slavery in school curricula.

A copy of the "Black Code" of 1743. © Wikipedia commons

The scope of the repeal had prompted discussion before the Senate debate, particularly over how to recognise the different legal texts applied across France’s former colonies.

Senator Evelyne Corbière Naminzo, who represents Réunion and sits with the Communist group, had argued that the legislation governing slavery in the Indian Ocean should be explicitly mentioned, with the “same weight” as the Code Noir applied in the French Antilles.

“When we talk about a symbol, we must not leave anyone out,” she told AFP ahead of the vote.

The Senate’s rapporteur, Louis Vogel, defended the bill’s broader wording, arguing that it already covered all the relevant texts.

“If we start drawing up a list, we are bound to leave some things out,” he told AFP, saying a symbolic law should above all “establish a principle”.

Tuesday’s approval completed the bill’s passage through Parliament.



Reparations remain an open question


While the repeal secured unanimous parliamentary support, it leaves aside the question of reparations – a longstanding demand in several French overseas territories.

During the National Assembly debate, MPs highlighted the contrast between the treatment of slave owners and those they had enslaved after abolition.

The French state compensated former owners for the loss of what the law had treated as their property. The emancipated people themselves received no compensation.

For supporters of reparations, that imbalance remains central to discussions about how France should address the consequences of slavery.

Those debates extend beyond remembrance to the persistent inequalities between overseas territories and mainland France, and the discrimination faced by black people.

The government report envisaged by the bill offers a way to examine those connections, although the legislation itself provides no compensation or other reparations measures.

(with newswires)
Cameroon's Eseka rail disaster survivors still waiting for justice, 10 years on

A decade after Cameroon’s deadliest rail disaster killed 79 people and injured more than 500, survivors are still living with serious injuries, some compensation remains unpaid and an appeal against the convictions over the crash has yet to be heard. RFI spoke to survivors still living with the consequences of the disaster and to the husband of a woman whose body has never been found.



Issued on: 21/10/2026 - RFI

The overturned carriages of the train that derailed at Eseka, around 100 kilometres from Yaoundé in Cameroon on 21 October 2016. AP - Joel Kouam

The Camrail train was travelling from Yaoundé to Douala when it derailed near the town of Eseka, around 100 kilometres from the capital, on 21 October 2016.

That morning, traffic on the road linking Cameroon’s political capital Yaoundé with its economic capital Douala was disrupted, prompting large numbers of people to take the train instead. Numerous carriages were added to cope with the influx of passengers.

An investigation later found that the train was travelling at 96 kilometres per hour on a section limited to 40 kilometres per hour. It also pointed to an overloaded train, the inappropriate addition of extra carriages and carriages with defective braking systems.

The report said Camrail management had failed to take into account concerns raised by the train driver before departure.

Lasting injuries

Among those who survived the crash was Eugénie, now 39, who suffered several fractures, including one to her neck, and has since lost her independence.

“I remember saying three times: ‘Jesus, save me.’ I was trapped underneath the carriage. I started praying and shouting: ‘Please, come and help me, come and help me',” Eugénie told RFI.

“There were so many people. We didn't know who would be saved and who would be left there. There was blood everywhere, people were screaming and crying.”

Eugénie suffered several fractures, including one to her neck, and has since lost her independence.

“I can't do anything by myself,” she said. “I always need someone to be at home with me. Since that accident, my life has ceased to exist. I'm constantly in pain, I suffer from memory loss, and my body is still in tremendous pain.”

Another survivor, Arnaud, was travelling in the second-to-last carriage.

“When things had settled down and I regained consciousness, I realised there were a lot of dead bodies in our carriage and that all the seats and luggage racks had been torn away,” he said.

Still searching

Among the families still seeking answers is that of Dorette Dissakè, a prominent notary in Yaoundé whose body has never been found.

“My daughter, the rest of the family and I are still waiting,” her husband, lawyer Thomas Dissakè, told RFI. “On what basis can we grieve and move on? The idea doesn't even cross our minds.”

Dissakè recently enlisted a team of experts, with the cooperation of Camrail and the Ministry of Transport, to examine the ground at Eseka in the hope of finding human remains.

“How is it possible that her body has never been found? The accident didn't happen at sea. Her carriage overturned at the station. They lifted it up and there was nothing. Was another carriage run over her? This mystery is still on my mind,” he said.

The family's search for answers has even led to the exhumation of a body in a village in Cameroon’s Centre region, but it was not Dissakè's wife.

Criminal convictions

In September 2018, Camrail and 11 of its employees were found guilty of involuntary manslaughter and causing unintentional injuries by the court of first instance in Eseka.

The company’s former managing director received a six-month suspended prison sentence. Other Camrail officials received suspended sentences of between three and five months, while the train driver, who was on the run, was sentenced to five years in prison.

Camrail appealed against the ruling, denouncing the “absence of any qualified and competent expert assessment”.

The appeal has still not been heard.

Lawyers representing the victims also said the compensation awarded was too low given the physical and psychological harm suffered. Some payments have still not been made.

The France-based Bolloré Group retained the Camrail railway concession after the disaster until it sold its transport activities to Italian-Swiss company MSC in 2022.

This article has been adapted from interviews in French by Richard Onanena and Jules Ntap.
AI midwife seeks to fill gaps in Zimbabwe's maternal health care

Mutare, Zimbabwe – With public health services stretched thin, women in Zimbabwe sometimes struggle to access reliable information about pregnancy and childbirth. A locally developed app aims to answer their questions and direct them to appropriate care, in an example of the potential of artificial intelligence to ease pressure on overloaded health systems.


Issued on: 17/10/2026 - RFI

A pregnant woman in Zimbabwe looks at her phone to get pregnancy-related information from a WhatsApp chatbot known as DawaMom. © Farai Shawn Matiashe


By: Farai Shawn Matiashe

When Harare resident Samantha Murungweni found out she was pregnant for the first time earlier this year, she felt scared.

The 25-year-old, who lives in Greendale, one of the capital's suburbs, wasn't able to ask midwives all the questions she had when she registered for antenatal care at her local clinic. Zimbabwe’s public healthcare facilities often have lengthy queues.

Murungweni sought help from friends and social media – but she struggled to get reliable information.

Then a friend introduced her to DawaMom, an AI-powered chatbot designed to provide pregnancy-related information.

“I asked about food that would keep both of us healthy,” Murungweni, who started using the service in her second trimester, told RFI.

“I also asked about back pain, frequent urination and foetus movements in the uterus. It felt like I was talking to a real midwife.”


Easy access


Developed in 2024 by DawaHealth, a Zambia-based startup, DawaMom gives pregnant women and mothers validated medical information and connects them with licensed health workers via WhatsApp.

While accessing the chatbot is free, users must pay a subscription fee for more advanced services such as personalised monitoring or home visits.

Tafadzwa Kalisto Munzwa, DawaHealth co-founder and chief executive officer, said they chose WhatsApp because millions of people across Southern Africa already use the platform to communicate with their families and access information directly from their smartphones.

“Google is not accessible to everyone because internet data is expensive, but most people still keep a WhatsApp data bundle,” he told RFI.


A screenshot of a conversation with DawaMom, a WhatsApp chatbot which provides pregnancy-related information for women in Zimbabwe. © Farai Shawn Matiashe

Developers also sought to make the service more reliable than a traditional internet search.

To ensure medical information is accurate and relevant to the local context, DawaMom does not generate answers from general content on the internet. Instead, it uses a technique known as retrieval-augmented generation to provide responses based exclusively on a verified database.

Munzwa said the team compiled information from dozens of medical sources – including Health Ministry guidelines, World Health Organization recommendations, medical school curricula and hospital protocols on women’s health – to create an authoritative knowledge base.

“More than 25 health workers translated and validated this content into Shona, Ndebele and Tonga. Every answer DawaMom gives is drawn from this database,” he said.

Adapting the service to Zimbabwe’s multilingual context was also part of establishing trust.

“This year we also worked with more than 30 women from across Zimbabwe to build an English-Shona code-switching dataset,” said Munzwa. “This lets DawaMom understand the way people actually speak, mixing English and Shona, and reply by voice in a Shona accent that users find natural and understandable.”

According to the company, DawaMom has supported over 20,000 users to date. They are targeting 50,000 users by the end of 2026.

Stigma and sisterhood: how one Kenyan woman knitted a healthcare revolution
Reducing pressure on health workers

With a lack of funding in the health sector and mass migration of skilled professionals abroad, Zimbabwe faces severe shortages of health workers.

Nurses and doctors handle heavy workloads, especially in rural areas. Zimbabwe had just over 22 health workers per 10,000 people in 2022, less than half the World Health Organization’s recommended 45 per 10,000, according to an analysis by the WHO and Ministry of Health.

Elijah Dakwa, president of the Zimbabwe Medical Analytics and Informatics Network (ZiMAIN), which brings together medical professionals, researchers, data scientists and technology experts, says artificial intelligence can help ease the pressure on the country’s health workers – but only if it is used to support them rather than replace them.

“Clinicians we have can focus on the high‑risk cases instead of being swamped by low‑acuity visits,” he told RFI.

Dakwa says building robust digital infrastructure, improving connectivity, making devices widely available and providing training are key to the adoption of AI in the health sector.

“When that is in place, AI acts as a force multiplier: faster, more consistent, clearer decision-support systems for health workers and fewer unnecessary trips to central hospitals, which ultimately reduces congestion and workload across the system.”

The women carrying the burden of Kenya’s rural healthcare on their backs
Identifying high-risk patients

According to Munzwa of DawaHealth, AI can act as a triage filter, identifying women who need urgent or in-person follow-up and those who can be reassured at home without visiting a clinic.

“This means high-risk patients are less likely to be missed and are prioritised for follow-up, so limited staff and resources have more impact,” he said.

DawaMom connects pregnant women and mothers with licensed healthcare facilities and automatically identifies high-risk women, enabling the company to follow up with those who need additional care.

Rutendo, from Rusape in eastern Zimbabwe, used the chatbot to learn about numbness and spotting in the first trimester of her pregnancy.

But one day, when she was in her final trimester, she became alarmed after going for days without feeling any movement from the foetus.

Why the African continent has a role to play in developing AI

Rutendo consulted DawaMom and the chatbot advised her to see a doctor immediately.

She hurried to the nearby clinic where she was registered for antenatal care, but it was too late. The foetus had died after becoming tangled in the umbilical cord, a situation that can also lead to dangerous complications for the mother.

“The information I got saved my life,” said 31-year-old Rutendo, who asked RFI not to use her full name.

In Harare, Murungweni gave birth to a girl last month. DawaMom eased her fears about becoming a mother.

“It helped me navigate pregnancy and gave me access to accurate medical information I was struggling to get elsewhere,” she said.
New Caledonia looks to EU for new markets for troubled nickel sector

The French territory of New Caledonia in the Pacific signed a strategic partnership with the European Union on Tuesday, paving the way to new markets and investment for its struggling nickel industry. The agreement aims to bring producers closer to European supply chains, although funding and industrial projects are yet to be secured.



Issued on: 20/10/2026 - RFI

The European Commission's Stéphane Séjourné meets New Caledonian President Milakulo Tukumuli to discuss the territory’s economic challenges, the future of its nickel industry and European support. © Stéphane Séjourné/X

The memorandum of understanding, signed in New Caledonia's capital Nouméa, sets out cooperation on raw materials, cleaner production and investment, as Brussels seeks to diversify the supply of minerals essential to European industry.

European Commission executive vice-president Stéphane Séjourné signed the agreement alongside New Caledonia's President Milakulo Tukumuli and Alcide Ponga, the government member responsible for nickel.

Addressing the territory’s Congress on Monday, Séjourné said New Caledonia could become “a pillar” of Europe’s effort to diversify its nickel supplies, particularly by forging closer links with the battery sector.

He said the partnership would be “non-exclusive” and would not require the territory to surrender control over its resources. Fifteen other countries have agreements of this kind with the EU, he added.

For New Caledonia, the agreement represents broader commercial opportunities and support for modernising an industry facing high energy costs and a loss of competitiveness.

For Brussels, it forms part of a wider push to strengthen European industrial sovereignty and reduce dependence on China for strategic supplies.



From plans to projects


The deal provides a framework for cooperation, but does not guarantee the purchase of New Caledonian nickel, or funding or immediate investment.

A roadmap is to be drawn up within six months, identifying priority projects, how cooperation will work and possible sources of European funding, according to TV channel Nouvelle-Calédonie La 1ère.

Reducing the carbon footprint of production is expected to be an important consideration. Cleaner energy could help address the nickel sector’s heavy operating costs, while making the product more attractive to buyers seeking lower-emission supplies.

However, the agreement offers no immediate answer to the difficulties faced by the territory’s three nickel plants. The New Caledonian government says it must be accompanied by a locally defined nickel strategy and investors willing to support industrial facilities and jobs.

Speaking in Congress, Vaimu’a Muliava of centrist party L’Éveil Océanien – Oceanian Awakening – said the memorandum was not binding, but paved the way to work on a further agreement.

“We are at a turning point where Europe must tell us what our competitive advantage is in being European today,” he said.

The partnership extends beyond the nickel industry. Séjourné said the EU had committed nearly €32 million to New Caledonia’s energy transition since 2023, citing the proposed Tontouta pumped-storage power station – a project estimated to cost €400 million.

Other initiatives under consideration include an aviation maintenance and training centre and undersea cables in the Pacific.

European Investment Bank vice-president Ambroise Fayolle is due to visit New Caledonia in early December, while a €5 million European training and integration programme is scheduled to begin in the first quarter of 2027.

Political divisions


The agreement has also exposed political divisions over who should shape the future of New Caledonia’s resources.

The pro-independence Kanaky NC group boycotted Monday’s Congress session, criticising the decision to proceed with the signing without first consulting elected members.

It said it was not opposed to a partnership with Europe, but wanted the nickel strategy developed locally with the provinces, Congress, customary authorities, industry operators and the French state.

Only one representative from the National Union for Independence attended the session, without taking the floor.

The anti-independence Rassemblement-LR described the boycott as a “political blunder”, while loyalists welcomed Europe’s approach as a “gesture of goodwill”.

Alongside the partnership, the European Commission is proposing to double the EU budget allocation for overseas countries and territories to €1 billion for 2028–2034 – a proposal which remains subject to negotiations between the European Parliament and EU member states.

21ST CENTURY ALCHEMY


Could lab-made gold crash prices like diamonds? US start-up says it turned mercury into gold

FILE. Gold coins and gold bars are shown at the California Numismatic Investments, Inc. in Inglewood California, 13 March 2008
Copyright AP Photo/Nick Ut


By Quirino Mealha
Published on


Little-known San Francisco start-up Marathon Fusion says it has turned mercury into stable gold at ten times the rate of CERN's record, raising a question that has haunted the diamond trade: could lab-made gold one day sink the price of the mined metal?

Marathon Fusion, a small fusion energy company in San Francisco, announced on Wednesday that it had transmuted, or converted, mercury into stable gold last month, beating a record set by CERN tenfold. The Geneva-based organisation runs the world's largest particle physics laboratory.

The claim, which has not been independently verified, revives an alchemist's dream and a market fear that lab-made gold could do to bullion what lab-grown precious stones did to diamonds.

Founded in 2023 by Kyle Schiller and Adam Rutkowski, a former SpaceX engineer, Marathon develops fuel systems for future fusion power plants, which aim to generate electricity by fusing atoms together, as the sun does.

It lists the US Department of Energy as a partner on its website and won a 2023 award from ARPA-E, the department's agency for high-risk energy research.

Its backers include Breakthrough Energy, the climate technology network founded by Bill Gates, and Anglo American, the mining group that owns De Beers, the world's leading natural diamond company behind the "A diamond is forever" slogan.

In its announcement, the company said it had turned "mercury into real, stable gold, beating CERN's record by a factor of 10".

In 2025, CERN said its Large Hadron Collider (LHC), the world's most powerful particle accelerator, had created about 29 picograms, or 29 trillionths of a gram, of gold during its 2015–2018 run. That amounted to around 86 billion gold nuclei, or atomic cores, which existed for only a tiny fraction of a second before being destroyed in collisions with accelerator equipment.

Marathon's method fires neutrons from fusion reactions at mercury, turning it into an unstable isotope, or form of the metal, that decays into gold.

It also claims to have broken a 40-year-old Soviet record with its plasma centrifuge, a machine that spins electrically charged gas at high speed to separate isotopes used in fusion fuel.

It says it is now building a reactor in San Francisco to achieve record power density, meaning the most power produced for its size.

The gold claim has not been independently verified, and the material available does not establish how much gold was produced or at what cost.

What happened to diamonds?

Lab-grown diamonds are chemically identical to mined stones.

Although specialists can tell them apart, factories churned them out and sold them for a fraction of the price.

Wholesale prices for lab-grown stones fell 90% to 95% from their 2015 levels, diamond industry analyst Paul Zimnisky said last year, while competition from lab-grown stones also weighed on mined diamond prices.

De Beers launched its own lab-grown brand, Lightbox, in 2018 at $800 (€712) a carat. However, it shut it down in 2025 to focus on natural diamonds.

De Beers made an underlying loss of $511 million (€455mn) in 2025, and Anglo American is in talks to sell its 85% stake for about $1 billion (€890mn) to a group led by former De Beers boss Gareth Penny, according to Bloomberg, citing people familiar with the matter.

Swiss luxury group Richemont, which owns Cartier, and US jeweller Signet, which owns Kay and Zales, are reportedly also in talks to join the group.

Why gold is different

Gold is a far bigger market.

Mines produced 3,672 tonnes in 2025, and about 222,600 tonnes have been mined throughout history, according to the World Gold Council.

Central banks also hold it in their reserves as a safe store of value, and many have been buying heavily in recent years, including those of China and Poland.

Gold traded at $4,062 (€3,617) an ounce on Thursday, more than 27% below its record high of $5,598 (€4,985) in January.

Marathon's own 2025 study estimated that a fusion plant could make about 5 tonnes of gold a year per gigawatt of electricity, roughly the output of a large nuclear reactor.

On that basis, 100 such plants would add an estimated 500 tonnes a year, roughly 14% of last year's mine output.

However, no fusion plant yet sells electricity, and the first commercial ones are still years away. The gold could also contain radioactive isotopes and might need to be stored for up to 18 years before it could be sold, the company has said.

There are currently no public plans to attempt to produce and commercialise the product, but unlike lab-grown diamonds, transmuted gold, once its radioactivity fades, would be impossible to tell apart from the mined kind.

SPAGYRIC HERBALISM

Poison and remedy: secrets of the botanic garden at Paris's Pharmacy Faculty

Paris – A stone's throw from the Jardin du Luxembourg on Paris's Left Bank, the Faculty of Pharmacy is home to a botanical garden which serves as an educational resource for students and a space for research – as well as a place where visitors can find biodiversity in the heart of the city.


Issued on: 18/10/2026 -  RFI

The garden at the Faculty of Pharmacy in central Paris, with its tropical greenhouse, has become part of the fabric of the neighbourhood. © Olivier Favier / RFI

Accessed by passing between majestic buildings designed in the late 19th century by famed architect Charles Laisné – as well as others added during the 1960s – the botanical garden covers nearly 3,500 square metres.

In the warmer months, students eat lunch at picnic tables in the shadow of the laboratory building, recognisable by its dozens of chimneys.

“When they start their pharmacy studies, the students are welcomed into the garden,” says lecturer and researcher Florence Chapeland-Leclerc. “From their second session with us, they work in the lab with samples cut on site.”

Heated debate over herbalism

Relations between the pharmacy and herbalism sectors have long been fraught.

France stopped issuing herbalist certification in 1941, and specialist shops have become increasingly rare – and are no longer permitted to recommend any particular plant for therapeutic purposes.

While the debate remains heated between those who fear the revival of alternative medicine with no scientific basis and those who regret the loss of traditional knowledge, the Faculty of Pharmacy – part of Paris Cité University – draws on both practices.

Here, a bachelor’s diploma in herbal medicine is awarded, aimed primarily at pharmacy assistants seeking to add another string to their bow, and also frequently at those looking to change careers.


“The term ‘phytotherapist’ is in itself a misnomer. A pharmacist does not, in fact, have the status of a therapist,” points out Raphaël Grougnet, a lecturer and researcher specialising in pharmacognosy – an applied science which studies medicinal substances of natural origin, whether they come from plants, animals, fungi or micro-organisms.

However, knowledge of plants and fungi is also an integral part of the training of community pharmacists, which culminates in a practical doctorate after five years of study, in addition to the foundation year common to many professions in the medical sector, including doctors, physiotherapists and dentists.

By their second year, a pharmacy student must be able to identify 120 plant species.

“These are the source of many medicines,” explains Grougnet. “Willow bark was known for its anti-inflammatory, antipyretic and analgesic properties [reducing fever and pain]. Aspirin was derived from it.”

Psychedelic therapy gains ground in Europe, under strict conditions
Dangerous mistakes

In the garden, the beds are organised in two ways. The first corresponds to what is known as botanical systematics – the classification into families, genera and species established by Swedish botanist and physician Carl von Linné and subsequently revolutionised by Charles Darwin.

The second method classifies plants according to their toxicity. While some plants are toxic at any dosage, others contain substances which, at certain doses, can be used medicinally.

The botanic garden's greenhouses – designed by Gustave Eiffel’s workshops and faithfully restored between 2000 and 2002 – are dedicated to tropical species.

The garden is an integral part of the neighbourhood’s heritage, and the interest shown by its neighbours – who regularly appear at the gates to watch plants being pruned – also reflects a renewed appreciation for plants, says Chapeland-Leclerc.

Yet this interest, where knowledge is lacking, can lead to some dangerous mix-ups.

“A common mistake is confusing wild garlic with lily of the valley, which is toxic to the heart, or saffron-coloured oenanthe with wild parsnip,” she explains.

From ornitherapy to kissing trees, how can nature benefit human health?

If in doubt, consulting a pharmacist can help avoid mistakes that have serious consequences.

Chapeland-Leclerc said that while increasingly popular plant identification apps are fairly reliable, those for mushrooms remain inaccurate and should under no circumstances be trusted to classify which specimens are safe to consume.

French pharmacies commonly offer to check the safety of foraged mushrooms – but Chapeland-Leclerc stressed that if you take yours to your local chemist, it's important to bring your entire haul.

“Pharmacists still have a naturalist side to them that we might not necessarily realise,” she smiles.

This article was adapted from the original version in French by Olivier Favier.



World set to breach 1.5C warming limit as UN warns time is running out


Global warming is now set to breach the 1.5C target limit set out in the 2015 Paris Agreement, after decades of insufficient climate action, the United Nations Environment Programme has warned. Temperatures could still be reduced, but only with far larger emissions cuts and the removal of vast amounts of carbon dioxide from the atmosphere using methods the UN says are "costly and risky".


Issued on: 21/10/2026 - RFI


A giant postcard calling for global warming to be limited to 1.5C is displayed on Switzerland’s Aletsch glacier in November 2018. © Valentin Flauraud/Keystone via AP

The chances of keeping average warming to 1.5C have effectively vanished – at least temporarily – the UN Environment Programme (UNEP) said in its annual Emissions Gap Report published on Wednesday.

The report comes ahead of Cop31, the UN climate conference to be held in Antalya, Turkey next month. UNEP had already raised the prospect of an overshoot – temporarily exceeding the 1.5C limit before bringing temperatures back down – in its Limiting Overshoot report in September.

Average global warming is already around 1.4C above pre-industrial times, when economic development in the West began warming the planet. The past nine years have been the hottest on record.

The year 2024 was the first individual year to average more than 1.5C above pre-industrial levels, however the Paris Agreement target refers to long-term warming, typically measured over around 20 years.

In 2025, global emissions stood at 58.4 gigatonnes of CO2 equivalent, a measure used to compare the warming effect of different gases.

That total was roughly unchanged from 2024, but CO2 from fossil fuels, nitrous oxide and fluorinated gases are still rising, so it is too early to say emissions have peaked, UNEP warned.

Smaller releases from forest fires, after an exceptional 2024, offset those increases.


'Imminent and unavoidable'

After decades of falling short on emissions cuts, a larger overshoot of the 1.5C limit is now “imminent and unavoidable”, the report said.

Passing 1.5C does not trigger a single sudden shift. Instead, each additional fraction of a degree adds to the damage, shrinking sea ice, thawing permafrost, killing corals and worsening droughts and fires, with knock-on effects on health and on food and energy prices.

The challenge is to keep warming well below 2C while limiting how far and how long temperatures overshoot 1.5C, with a credible return by the end of the century, the report said. Some changes, including glacier melt, cannot be reversed.

“Overshoot is not surrender. We can still keep it as small and as short as possible,” UN secretary-general Antonio Guterres said in a video message released with the report.

In the best-case scenario, warming would peak at 1.7 or 1.8C around the middle of this century before falling. This scenario gives an approximately 50 percent chance of returning to 1.5C or below by 2100. Emissions would have to fall by 18 percent by 2030, 45 percent by 2035 and 69 percent by 2040 – so almost 6 percent a year.

“This 18 percent reduction in greenhouse gas emissions makes complete sense. If we act very quickly, with political will and courage, it is entirely possible,” UNEP executive director Inger Andersen said at a press conference.

Pledges off track


Even if governments fully implemented their national climate plans, emissions would fall by only 5-8 percent by 2030 and 11-15 percent by 2035, the report found.

Warming would still reach about 2.6C by the end of the century on that basis, or 2.8C under current policies. Without urgent action, keeping peak warming below 1.7 or 1.8C will soon become impossible.

Returning to 1.5C would also require cutting coal’s share of the world’s energy supply by 55 percent by 2035, oil by 15 percent and gas by 5 percent. Coal-fired electricity would need to be effectively phased out worldwide by 2040, even as China and India continue building new plants.

Methane, a powerful greenhouse gas, would need to fall at least 25 percent below 2025 levels by 2035 and at least 40 percent by 2040. Such cuts are within technical reach if governments find the will to repair leaks that satellites can now track.

Carbon removal gamble

Deep emissions cuts would not be enough on their own. Bringing temperatures back down would also require removing CO2 already in the atmosphere.

The best-case pathway would require removing and storing about 320 gigatonnes of CO2 over the century, equivalent to roughly eight years of emissions.

Carbon could be removed through nature-based measures such as planting forests and improving wetland management, as well as technologies that capture emissions during energy production or remove CO2 directly from the air, report author Keywan Riahi explained.

But both natural and technological approaches may fail to remove carbon on the scale required. Climate change is weakening nature’s ability to absorb CO2, while technological solutions remain uncertain.

“All of those technologies come with risks,” said Riahi, director of the Energy, Climate and Environment Program at the International Institute for Applied Systems Analysis, an Austria-based research centre.

The aim should therefore be to keep the overshoot as low as possible so the world does not have to depend heavily on carbon-removal technologies later, he said.

UNEP had already warned in its September report that large-scale carbon removal carried major risks. “Removal on such a scale is costly and risky,” UNEP science advisor Anne Olhoff said.

Solar boom, fossil reliance

One area in which progress has been made is clean energy. Solar power has expanded seven times faster than expected since the Paris Agreement, the report found, while renewables are on track to meet the goal of tripling global capacity by 2030.

Andersen said this showed climate policies can work, although clean-energy growth alone would not be enough.

Fossil-fuel use has not fallen at the same pace.

Oil, gas and coal still provide 80-86 percent of the world’s energy supply, while demand is rising with growth in emerging economies, electric vehicle sales and data centres. Reducing energy demand, which science recognises as an effective way to cut emissions, is not mentioned in the report.

Countries in attendance at the Cop28 UN climate summit in Dubai in 2023 agreed to transition away from fossil fuels in energy systems.

“Developing renewable energy is of course critically important, but we increasingly need to focus on phasing out fossil fuels. We are not seeing progress anywhere near what is needed,” Olhoff said.

This article was adapted from the original version in French by Géraud Bosman-Delzons.