Saturday, November 18, 2023

 

New study reveals that bees cannot taste even lethal levels of pesticides


New research from the University of Oxford has revealed that bumblebees cannot taste pesticides present in nectar, even at lethal concentrations. This means bumblebees are not able to avoid contaminated nectar, putting them at high risk of pesticide exposure


Peer-Reviewed Publication

UNIVERSITY OF OXFORD




New research from the University of Oxford has revealed that bumblebees cannot taste pesticides present in nectar, even at lethal concentrations. This means bumblebees are not able to avoid contaminated nectar, putting them at high risk of pesticide exposure and posing a threat to crop pollination.

Bees are important pollinators of agricultural crops, but this can expose them to pesticides while they collect nectar and pollen – some of which are very toxic to bees. Bees are known to be adept at tasting and differentiating sugary solutions. Certain toxic compounds, like quinine, taste “bitter” to bees, so the researchers sought to find out whether this sense of taste could help them avoid drinking pesticides.

The researchers used two methods to test whether bumblebees (Bombus terrestris) could taste neonicotinoid and sulfoximine pesticides in nectar which mimicked that of oilseed rape (Brassica napus), and if they would avoid drinking pesticides over a very broad range of concentrations. They used electrophysiology to record the responses of neurons in taste sensilla (i.e., ‘tastebuds’) on bumblebee’s mouthparts. This allowed them to track how often neurons ‘fired’ and therefore the strength of response to the taste. The researchers also tested the bumblebees’ feeding behaviour by offering them either sugar solutions or pesticide-laced sugar solutions to feed on.

The results demonstrated that the responses of the neurons were the same whether the bees drank sugar solution or sugar-containing pesticides. This indicates that the bumblebees' mouthparts do not have mechanisms to detect and avoid common pesticides in nectar.

In the behaviour experiments, the bees consumed the same amount of food, regardless of whether the solution contained pesticides or not. This was even the case when the pesticides were present at concentrations high enough to make the bees very ill.

The findings are important because they show that bumblebees cannot avoid pesticide exposure using their sense of taste.

Lead author Dr Rachel Parkinson (Department of Biology, University of Oxford), said: 'As bumblebees cannot taste pesticides and don’t experience immediate negative consequences from drinking them, they likely would not be able to avoid consuming nectar contaminated with pesticides in the field.'

Dr Parkinson added: 'This research is important when considering the use of pesticides on outdoor crops due to the risk posed to bees as they will not avoid drinking these compounds. Potentially, these findings could be applied towards searching for a non-toxic compound that tastes bad to bees and could be used as a "bee deterrent" on pesticide-treated crops that do not require insect pollination.'

Although bees did not drink less of the pesticide-laced solutions, the authors demonstrated “bitter” taste avoidance using the compound quinine. Quinine in sugar solution was deterrent to bees at high concentrations. At low concentrations, bees were observed to ingest less of the sugar solution, however the amount of time they spent in contact with the feeding solution was the same.

*The pesticides used in the study were the neonicotinoids imidacloprid, thiamethoxam, clothianidin and the sulfoximine pesticide sulfoxaflor.

Notes to editors

The paper ‘Mouthparts of the bumblebee (Bombus terrestris) exhibit poor acuity for the detection of pesticides in nectar’, published in eLife, is available online at https://doi.org/10.7554/eLife.89129.

Interviews with Dr Rachel Parkinson are available on request: rachel.parkinson@biology.ox.ac.uk

About the University of Oxford

Oxford University has been placed number 1 in the Times Higher Education World University Rankings for the eighth year running, and ​number 3 in the QS World Rankings 2024. At the heart of this success are the twin-pillars of our ground-breaking research and innovation and our distinctive educational offer.

Oxford is world-famous for research and teaching excellence and home to some of the most talented people from across the globe. Our work helps the lives of millions, solving real-world problems through a huge network of partnerships and collaborations. The breadth and interdisciplinary nature of our research alongside our personalised approach to teaching sparks imaginative and inventive insights and solutions.

Through its research commercialisation arm, Oxford University Innovation, Oxford is the highest university patent filer in the UK and is ranked first in the UK for university spinouts, having created more than 300 new companies since 1988. Over a third of these companies have been created in the past five years. The university is a catalyst for prosperity in Oxfordshire and the United Kingdom, contributing £15.7 billion to the UK economy in 2018/19, and supports more than 28,000 full time jobs.

The Department of Biology is a University of Oxford department within the Maths, Physical and Life Sciences Division. It utilises academic strength in a broad range of bioscience disciplines to tackle global challenges such as food security, biodiversity loss, climate change and global pandemics. It also helps to train and equip the biologists of the future through holistic undergraduate and graduate courses. For more information visit www.biology.ox.ac.uk.

 

Break free from dependence on Japan by developing core electric vehicle components


Localization of Silicon Nitride Bearing Ball Manufacturing Technology


Business Announcement

NATIONAL RESEARCH COUNCIL OF SCIENCE & TECHNOLOGY

Image 1 

IMAGE: 

COMPARISON OF CRUSHING STRENGTH AND LIFE EVALUATION RESULTS OF T COMPANY SILICON NITRIDE BALLS AND KIMS SILICON NITRIDE BALLS

view more 

CREDIT: KOREA INSTITUTE OF MATERIALS SCIENCE (KIMS)




A research team led by Dr. Jae-woong Ko from the Department of Engineering Ceramics at the Korea Institute of Materials Science(KIMS) has succeeded in localizing silicon nitride bearing ball manufacturing technology for electric vehicle drive modules. KIMS is a government-funded research institute under the Ministry of Science and ICT. This achievement is significant because it overcomes the limitations of foreign dependence and opens up the possibility of domestic supply and demand.

Silicon nitride bearing balls offer the advantage of preventing failures due to electric erosion in the high-power and high-speed rotational environments of electric vehicles. They also demonstrate high durability and reliability. However, there has been a persistent issue since these products have been exclusively imported from Japan. The supply of core components is of such paramount importance that the government is considering it a key policy to address the global supply chain reorganization in 2022, resulting from Japan's exclusion of Korea from the whitelist in 2019. In the case of electric vehicles, both the automotive industry and manufacturers of finished bearing products concur that the supply and demand for bearing balls, a crucial material for parts that rotate at speeds exceeding 20,000 RPM, is not running smoothly.

The research team has been developing technology to meet domestic demand, encompassing a range from silicon nitride raw material powder to materials and bearing ball parts. Subsequently, they conducted tests on the technology through external certified evaluation agencies and demand companies. They succeeded in achieving mechanical properties and life expectancy values closely aligned with those of T Company, the world's leading silicon nitride bearing ball manufacturer. When evaluating T Company's commercial balls and the research team's manufactured balls under the same conditions, the crushing strength, which is a performance indicator for load-bearing capacity, demonstrated a comparative advantage of 103% to 105%. The rolling fatigue life, which is a performance indicator for withstanding high-speed rotation over an extended period, showed equivalent values.

Silicon nitride bearing balls are utilized in industries that require extreme operating conditions, including hybrid bearings rotating at high speeds in electric vehicle drive modules, bearings for wind turbines exposed to high loads, ultra-high-speed bearings for semiconductor process pumps, and bearings for space and aviation applications. The global market size of the hybrid bearing sector employing silicon nitride bearing ball technology was approximately KRW 1 trillion in 2022 and is expected to exceed KRW 1.3 trillion after 2026, driven by the rapid growth of the electric vehicle market.

Dr. Jae-woong Ko, responsible for developing this technology, said,“I believe we have established a bridgehead for securing our own supply chain that can meet the domestic demand for silicon nitride bearing balls through technology transfer to companies in the future.”adding, “We can expect not only an import substitution effect through local production, but also exports to overseas countries.

This research was conducted as part of the KIMS fundamental project ‘Development of ceramic rolling bearing materials for semiconductor high vacuum pump bearings’ funded by the Ministry of Science and ICT. Currently, the research team's objective is to transfer this technology to domestic small and medium-sized companies with the necessary infrastructure and capabilities to mass-produce domestic ceramic materials and components. The goal is to secure a domestic supply chain for silicon nitride bearing balls and hybrid bearing supply chains through future mass production support.

 

Image 2 (IMAGE)

NATIONAL RESEARCH COUNCIL OF SCIENCE & TECHNOLOGY

-------------------------------------------------------------------------

###

About Korea Institute of Materials Science(KIMS)

 

KIMS is a non-profit government-funded research institute under the Ministry of Science and ICT of the Republic of Korea. As the only institute specializing in comprehensive materials technologies in Korea, KIMS has contributed to Korean industry by carrying out a wide range of activities related to materials science including R&D, inspection, testing&evaluation, and technology support.

 

A novel system for slip prevention of unmanned rovers


Researchers take inspiration from muscles in the human body to develop a system that helps unmanned rovers detect slip condition

Peer-Reviewed Publication

SHIBAURA INSTITUTE OF TECHNOLOGY

Outline of the traveling state detection system. 

IMAGE: 

SIMILAR TO HOW HUMAN MUSCLES DETECT THE TRAVELING STATE OF THE BODY, THE SLIP CONDITION OF ROVERS CAN BE DETERMINED BY DETECTING THE DEFORMATION OF THEIR CHASSIS. THIS TECHNOLOGY CAN BE USED TO PREVENT THE SLIPPING OF ROVERS.

view more 

CREDIT: KOJIRO IIZUKA FROM SHIBAURA INSITITUTE OF TECHNOLOGY




Given the hostile conditions of extraterrestrial environments, unmanned rovers play a critical role in the exploration of planets and moons. NASA's Mars and lunar exploration rovers have significantly contributed to our understanding of these extraterrestrial bodies. Planetary surfaces often present challenging landscapes with slopes, craters, and dunes. More importantly, the presence of regolith, fine particles that cover these surfaces, poses a significant challenge for rover mobility. The slipping of rovers on these loose surfaces can hinder their progress and even jeopardize their missions.

Various methods, primarily relying on visual data from cameras, have been explored to detect the traveling state or slip condition of rovers. However, these methods have limitations as they may struggle to differentiate between various terrain features such as distinguishing rocks from loose sand. A solution to this problem is for the rovers to obtain information about the traction on each wheel. This way, the rover could detect its traveling state faster and correct its posture to avoid slipping.

To realize this, Professor Kojiro Iizuka from the Department of Machinery and Control Systems of the College of Systems Engineering and Science at Shibaura Institute of Technology (SIT), Japan, and Dr. Kohei Inaba, also from SIT, have recently developed a novel system that allows a rover to detect its traveling state by the change in shape of its chassis. “Our inspiration came from how humans detect their own traveling state based on muscle tension while walking. We aimed to develop a similar system that recognizes the traveling state based on the chassis shape deformation,” explains Prof. Iizuka. Their study was published in Volume 15, Issue 17 of the journal Remote Sensing on August 30, 2023.

The muscles in the human body have special muscle fibers called nuclear chain fibers and nuclear bag fibers which help in detecting the traveling state of the body. The nuclear chain fibers detect the displacement of the tension in the muscles and help in determining the static posture of the body. On the other hand, nuclear bag fibers detect how fast muscle fibers stretch and help in detecting the dynamic state of the body.

Drawing parallels with human muscles, the researchers classified the change in the shape of the chassis of the rover, which manifests as strain, into two categories: displacement of strain and vibrational change in strain. They studied the strain displacement data using nuclear chain fibers analysis and strain velocity as nuclear bag fibers analysis.

The nuclear chain fiber analysis revealed that the forces acting vertically and in the direction of the rover's motion changed with strain. Therefore, monitoring strain changes can enable the detection of force alterations, ultimately indicating the rover's traveling state. In addition, through nuclear bag analysis, the researchers found that the rate of strain change could effectively gauge the level of slippage and subsequent alterations in the rover's travel state. Using this data, the system can determine the rover's condition in real time, thus enabling the rover to make essential maneuvers to avert potential slipping incidents.

The study also emphasizes the system’s capabilities to detect environmental obstacles, such as rocks and stones, highlighting its potential to enhance the safety and efficiency of rover operations.

Highlighting the importance of this study, Prof. Iizuka remarks: “During rover route planning, the experiences from this study should be considered to ensure that the rovers can travel safely. These findings represent the first step towards incorporating elements of biological functionality in sensing moving objects. We believe that our approach will also be effective for unmanned aerial vehicles and automatic driving in the future.”

In conclusion, this innovative study marks a significant step towards improving the safety and effectiveness of rover missions, promising advancements in our exploration of other planets and celestial bodies.

 

***

 

Reference
DOI: https://doi.org/10.3390/rs15174270

 

About Shibaura Institute of Technology (SIT), Japan
Shibaura Institute of Technology (SIT) is a private university with campuses in Tokyo and Saitama. Since the establishment of its predecessor, Tokyo Higher School of Industry and Commerce, in 1927, it has maintained “learning through practice” as its philosophy in the education of engineers. SIT was the only private science and engineering university selected for the Top Global University Project sponsored by the Ministry of Education, Culture, Sports, Science and Technology and will receive support from the ministry for 10 years starting from the 2014 academic year. Its motto, “Nurturing engineers who learn from society and contribute to society,” reflects its mission of fostering scientists and engineers who can contribute to the sustainable growth of the world by exposing their over 8,000 students to culturally diverse environments, where they learn to cope, collaborate, and relate with fellow students from around the world.

Website: https://www.shibaura-it.ac.jp/en/

 

About Professor Kojiro Iizuka from SIT, Japan
Kojiro Iizuka is currently a Professor at the Department of Machinery and Control Systems at the College of Systems Engineering and Science of Technology at Shibaura Institute of Technology (SIT), Japan. He received an M.S. degree in Mechanical Systems Engineering from the Tokyo University of Agriculture and Technology, Japan, in 1999 and his Ph.D. degree in Space and Astronautical Science from the Graduate University for Advanced Studies, Japan, in 2006. His research at the Terra-Mechatronics Researches Laboratory at SIT focuses on soft-ground driving systems and robotics. He has published around 90 research papers, which have been cited over 150 times.

 

Funding Information
This work was supported by JSPS KAKENHI Grant Number JP21K03952.

 

GIST researchers improve water splitting reaction for green hydrogen gas production


They achieve high performance with Schottky junction constructed between metallic Ni-W5N4 and semiconducting NiFeOOH catalyst


Peer-Reviewed Publication

GIST (GWANGJU INSTITUTE OF SCIENCE AND TECHNOLOGY)

Novel Schottky junction design for green hydrogen production 

IMAGE: 

SCIENTISTS DEMONSTRATE A SCHOTTKY JUNCTION WITH METALLIC NI-W5N4 AND N-TYPE NIFEOOH INTERFACE TO OVERCOME THE CONDUCTANCE LIMIT OF (OXY)HYDROXIDE SPECIES, PRODUCING HYDROGEN GAS VIA WATER SPLITTING REACTIONS.

view more 

CREDIT: JUNHYEOK SEO FROM GIST




Green hydrogen (or H2) produced from renewable energy resources is the fuel of a decarbonized future. Electrolysis or splitting of water into oxygen and hydrogen with the help of an electrochemical cell is one of the most popular ways of producing green H2. It is a simple reaction, ensures high-quality products, and has zero carbon emissions. Despite its advantages, however, electrochemical water splitting is yet to gain prominence on a commercial scale. This is because of the low electrical conductivity of active (oxy)hydroxide catalysts generated in situ during the electrochemical processes. This, in turn, leads to restricted catalytic activity, hampering hydrogen as well as oxygen evolution reactions in the cell.

 

The problem of (oxy)hydroxide’s poor electrical properties has been a long-standing challenge towards the achievement of efficient water splitting. Now, a team of researchers led by Associate Professor Junhyeok Seo from the Department of Chemistry at Gwangju Institute of Science and Technology, have found a solution to this issue in the form of Schottky junctions.

 

In a recent study made available online on 30 August 2023 and to be published in Volume 340 of the Applied Catalysis B: Environmental journal in January 2024they demonstrated an electrode with Schottky junction formed at the interface of metallic nickel-tungsten nitride (Ni-W5N4) and semiconducting n-type nickel-iron (oxy)hydroxide (NiFeOOH) catalyst. This electrode was able to overcome the conductance limit of (oxy)hydroxide and improved the water splitting ability of the setup.

 

Notably, two materials, a metal and a semiconductor, with largely different electronic behaviors were put in contact to make an energy difference at the interface, forming a junction. “Our research utilized this potential energy barrier present in the Schottky junction to accelerate electron flow in the electrode, leading to a significant increase in oxygen evolution reaction activity, expediting overall water splitting,” explains Dr. Seo, highlighting the core mechanism behind their newly designed electrode.

 

Upon carrying out electrocatalytic water splitting, the team observed that Ni-W5N4 alloy catalyzed the hydrogen evolution reaction, resulting in 10 mA/cm2 current density at a small overpotential of 11 mV. Furthermore, the rectifying Schottky junction formed at the interface of Ni-W5N4|NiFeOOH nullified the non-conductive lamination produced by (oxy)hydroxide species. In forward bias, it exhibited a current density of 11 mA/cm2 at 181 mV overpotential. The electrochemical analysis of the electrode revealed that the improved catalytic activity could indeed be attributed to the Schottky junction.

 

Lastly, the researchers designed an electrolyzer using their Schottky junction electrode for industrial seawater electrolysis. They found that the new device could operate continuously for 10 days, while also exhibiting outstanding catalytic activity and durability during electrolysis. It showed a remarkable current density of 100 mA/cm2 at an overpotential of just 230 mV. 

 

Overall, the researchers believe that these findings can contribute toward a sustainable strategy for hydrogen production to eventually replace conventional methods that still rely on fossil fuels. As Dr. Seo concludes, “Freshwater and seawater are abundant and renewable sources of protons. Efficient water splitting systems ensure that we can establish sustainable production of zero carbon hydrogen fuel, thus helping manage our current climate problems.

 

Let us hope that the successful demonstration of Ni-W5N4|NiFeOOH electrode for water splitting opens up new avenues for Schottky junction-based durable and high-performance energy storage and conversion systems!

 

***

 

Reference        

DOI: https://doi.org/10.1016/j.apcatb.2023.123233

 

 

About the Institute

The Gwangju Institute of Science and Technology (GIST) was founded in 1993 by the Korean government as a research-oriented graduate school to help ensure Korea's continued economic growth and prosperity by developing advanced science and technology with an emphasis on collaboration with the international community. Since that time, GIST has pioneered a highly regarded undergraduate science curriculum in 2010 that has become a model for other science universities in Korea. To learn more about GIST and its exciting opportunities for researchers and students alike, please visit http://www.gist.ac.kr/.

 

About the author

Prof. Junhyeok Seo is an Associate Professor in the Department of Chemistry at GIST, South Korea. He earned his master's degree in 2006 under the guidance of Prof. Young Keun Chung from Seoul National University. In 2013, he completed his PhD under the supervision of Prof. Eunsuk Kim at Brown University. Before joining GIST, he conducted postdoctoral research at Michael Rose’s Group at the University of Texas at Austin. His current research interests lie in the field of inorganic and molecular/material hybrid catalysts, focusing on electrochemical reactions related to energy conversion and storage processes.

ARACHNOLOGY

Pseudoscorpions of Israel: Two new family records discovered


Peer-Reviewed Publication

THE HEBREW UNIVERSITY OF JERUSALEM

Pseudoscorpion from Israel: Lasiochernes turcicus (Chernetidae) 

IMAGE: 

PSEUDOSCORPION FROM ISRAEL: LASIOCHERNES TURCICUS (CHERNETIDAE)

view more 

CREDIT: J. A. BALLESTEROS




A recent study has unveiled two previously undiscovered families of Pseudoscorpions in Israel. Positioned at the convergence of three continents, Israel's distinct biodiversity has undergone systematic revision, resulting in an updated checklist featuring 61 pseudoscorpion species across 28 genera and fourteen families. This pioneering research includes the introduction of the first illustrated identification key, based on morphological characters, accompanied by distribution maps. Notably, the study highlights the discovery of two new family records  in Israel—Syarinidae and Cheiridiidae—both with a cosmopolitan distribution, including in the Mediterranean region. The findings significantly enhance our comprehension of regional biodiversity, offering crucial resources for forthcoming ecological, taxonomical and conservation endeavors. Furthermore, several undescribed species identified in this paper will be comprehensively described in separate publications, further advancing the field of pseudoscorpion taxonomy.

[Jerusalem] – A new study on the pseudoscorpion fauna of Israel has been unveiled in a comprehensive publication titled "Pseudoscorpions of Israel: Annotated Checklist and Key, with New Records of Two Families". The research, conducted by Dr. Sharon Warburg, Dr. Efrat Gavish-Regev from the National Natural History Collections of the Hebrew University of Jerusalem and team, provides a crucial update to the understanding of the pseudoscorpion species in Israel.

Situated at the crossroads of three continents, Israel boasts a distinctive fauna, influenced by both Palearctic and Afrotropical zoogeographic origins. Over the past sixty years, systematic revisions and the discovery of new species have rendered the existing key to pseudoscorpions in Israel outdated. This newly released checklist offers a contemporary perspective on the pseudoscorpion species in the region, complete with distribution maps and a groundbreaking illustrated identification key based on morphological characters.

Before this study, the pseudoscorpion fauna of Israel was believed to consist of twelve families, 26 genera, and 52 species, including several "subspecies". However, the current research expands this catalog to include 61 pseudoscorpion species belonging to 28 genera and fourteen families. The majority of these species exhibit Palearctic and Mediterranean distributios, with only a few displaying Afrotropical origin.

An exciting revelation from this study is the discovery of two families previously unreported in Israel: Syarinidae and Cheiridiidae. Both families are cosmopolitan and have representatives in the Mediterranean region. The researchers note that the putative new species discovered during this study are presented at the genus level and will be further described in subsequent publications.

The significance of this research extends beyond the academic realm, offering valuable insights into the biodiversity of the region and providing a foundation for future studies in ecology taxonomy and conservation. The annotated checklist and key, with their meticulous documentation and visual aids, are expected to become essential resources for researchers, students, conservation organizations, and enthusiasts interested in pseudoscorpion taxonomy.

Disclaimer: In these challenging times of war and crisis, Hebrew University of Jerusalem is resolute in its dedication to advancing research and education. We stand in full support of the brave individuals on the frontlines, safeguarding our nation and the well-being of all Israelis, and extend our deepest gratitude and unwavering solidarity to our community and fellow citizens. Together, we shall prevail against the challenges that confront us, and our shared commitment to the well-being of all Israelis and the pursuit of knowledge remains resolute.

  

Pseudoscorpion from Israel: Hysterochelifer sp (Cheliferidae)

  

Pseudoscorpion from Israel: Olpium pallipes balcanicum (Olpidae)


Pseudoscorpion from Israel: Neobisium validum (Neobisiidae)

 

CREDIT

Shlomi Aharon

The Hebrew University of Jerusalem is Israel’s premier academic and research institution. With over 25,000 students from 90 countries, it is a hub for advancing scientific knowledge and holds a significant role in Israel’s civilian scientific research output, accounting for nearly 40% of it and has registered over 11,000 patents. The university’s faculty and alumni have earned eight Nobel Prizes and a Fields Medal, underscoring their contributions to ground-breaking discoveries. In the global arena, the Hebrew University ranks 86th according to the Shanghai Ranking. To learn more about the university’s academic programs, research initiatives, and achievements, visit the official website at http://new.huji.ac.il/en

The National Natural History Collections at the Hebrew University of Jerusalem are the most extensive biological collections of the Middle East. In addition to serving as a physical documentary of the regional natural history, the collections provide research material for studies in evolution, ecology, taxonomy, systematics, biodiversity, nature conservation, agriculture, wildlife forensics, history, and more. To learn more about the National Collections https://en-nnhc.huji.ac.il/

ANARCHIST SELF ORGANIZATION

Focus groups can work without a moderator, shows research


Remote moderation by video encourages frank discussion


Peer-Reviewed Publication

UNIVERSITY OF BATH




Focus groups that feed views, experiences and opinions into politics, business and research might yield more open interaction and discussion within groups by moving moderators to a separate room, shows new research.

The study developed and tested a novel ‘remotely-moderated’ focus group method where questions are posed on a screen, and moved along by a moderator watching the group from a different room.

Dr Annayah Prosser from the University of Bath’s School of Management said: “Without the moderator, the participants seemed particularly willing to go beyond their usual role of answering questions and took over the question-asking role. Group members also extended the reach of questions in interesting ways in situations where discussion stalled.

“We found that the groups talked about things we really didn’t expect them to, and that we hadn’t considered before as a research team. This methodology takes the potential biases of a moderator- quite literally- out of the room and helps us focus on what the group really thinks about an issue.”

The moderator has long been considered fundamental to the effectiveness of focus groups, probing answers and facilitating discussions, but, equally, researchers question whether they might hamper group interaction or inhibit group dialogue in some contexts.

The researchers say a remotely-moderated focus group can help overcome some of the problems a physically present moderator might create, while still incorporating many of the benefits moderation brings.

“When we first came up with the idea of trying to run focus groups in this way, we had a number of potential concerns,” said Dr Tim Kurz from the University of Western Australia’s School of Psychological Science, who was a senior collaborator on the study. “Would people actually talk? Would they stay ‘on topic’? Would the participants feel comfortable with the situation?

“However, we were blown away by not only how smoothly the conversations flowed but also how useful the kinds of qualitative data being produced were for exploring all sorts of potentially interesting and important research questions. It turns out that, sometimes, the best thing that you can do as a qualitative researcher is to just get out of the way and let participants talk amongst themselves!”

The team say many of the attributes that make a moderator a successful discussion manager are already familiar to people in the social rules and cues that lead to meaningful group conversations in our everyday lives: ensuring that everyone has a chance to speak, that everyone is respected and that no one person dominates.

“We were concerned that participants might mostly agree with each other to alleviate any social awkwardness or tension in the group,” said Prosser. “In fact we found that without a moderator present there was still some conflict in opinion throughout the groups, which then necessitated management by the participants themselves, rather than ‘through’ a moderator. It gives us access to a rather novel and rich form of ‘fly on the wall’ data for understanding how disagreements work, group boundaries and motivations and how people interact.”

The study, published in Qualitative Research in Psychology set up two remotely-moderated focus group designs. The first exploring dietary identity between groups of vegans, vegetarians and flexitarians, and a second context exploring gendered experiences of sexual harassment.

Over the course of the focus groups, participants were presented (remotely) with a number of questions via a screen presentation. The researcher aimed to provide about five minutes of discussion time for each question but had the flexibility to advance the slides sooner or later depending on the flow of the discussion.

Small silences were ignored by the researchers, as they found that some silences led to subsequent interesting discussion. However, the slide was advanced for longer periods of awkward silence (over 60 seconds) to ensure group rapport did not suffer.

The study team recommend that researchers hoping to use this method are mindful of the types of conflict that may occur within groups, and make plans for how to intervene in the event of discriminatory or hateful speech and actions.

They add that the methodology might not always be suitable for topics of research where participants are more vulnerable. Offering participants a discreet way to alert the moderator to their discomfort- for example by giving them remote buttons they can use to ‘bring the researcher in’ if need be- may be effective.

‘Talk amongst yourselves’: designing and evaluating a novel remotely-moderated focus group methodology for exploring group talk is published in Qualitative Research in Psychology by Annayah MB Prosser, Lois NM Heung, Leda Blackwood, Saffron O’Neill, Jan Willem Bolderdijk and Tim Kurz.