Thursday, October 29, 2026

 

“Eliminating hazardous substances and boosting efficiency tenfold”: DGIST develops eco-friendly solar hydrogen production technology





DGIST (Daegu Gyeongbuk Institute of Science and Technology)


Process for Fabricating Water-Based Low-Voltage Photoelectrodes via Nanocrystal Surface Modification

image: 

Process for Fabricating Water-Based Low-Voltage Photoelectrodes via Nanocrystal Surface Modification

view more 

Credit: Process for Fabricating Water-Based Low-Voltage Photoelectrodes via Nanocrystal Surface Modification



 


A research team led by Professor Jongmin Choi of the Department of Energy Science & Engineering at DGIST (President Kunwoo Lee), in collaboration with a team led by Professor Younghoon Kim of the Department of Chemistry at Kookmin University, has developed a highly efficient photoelectrode that produces hydrogen using sunlight through a water-based, low-voltage process.

 

□ Technologies that produce hydrogen—a clean energy source—using sunlight primarily employ titanium dioxide (TiO₂). Although highly stable, titanium dioxide has limited efficiency because it can absorb only ultraviolet light. To overcome this limitation, researchers have been exploring ways to combine it with silver- and bismuth-based nanomaterials that absorb a broader spectrum of light. However, conventional methods require high voltages of 200 volts (V) or more and toxic organic solvents to attach these materials to electrodes, posing a problem that runs counter to the original goal of “environmentally friendly hydrogen production.”

 

□ The joint research team completely resolved this problem by replacing the molecules on the surfaces of nanocrystals with “hydrophilic molecules” that mix readily with water, and then introducing the “aqueous electrophoretic deposition” process in which a low voltage is applied in an aqueous solution to induce the adherence of particles to the electrode.

 

□ Consequently, the team dramatically reduced the process voltage from the previous 200 V to merely 4 V, comparable to the voltage of a battery. Additionally, the researchers successfully coated the electrode with the material in just three minutes in a safe aqueous solution, without using toxic organic solvents, completely eliminating the problems of surface damage and impurity (oxidation byproduct) formation that occurred under high-voltage conditions.

 

□ The newly developed photoelectrode exhibited an approximately tenfold, or greater, increase in photocurrent under illumination compared with conventional single-material electrodes. In experiments conducted under conditions similar to natural sunlight, it achieved an excellent photocurrent density of 3.0 milliamperes per square centimeter (mA/cm²). It consistently retained 65.1% of its initial performance after two hours of continuous light exposure, while gas analysis confirmed that hydrogen was successfully produced.

 

□ This achievement is expected to make a significant contribution to the commercialization of truly “eco-friendly green hydrogen” production, as it uses materials that completely exclude hazardous substances such as lead and cadmium while substantially reducing the use of organic solvents and reliance on high voltages during the deposition process.

 

□ “The significance of this study lies in achieving high hydrogen production efficiency through a safe and clean water-based, low-voltage process, overcoming the limitations of conventional processes that relied on high voltages and toxic solvents,” said Professor Jongmin Choi of DGIST’s Department of Energy Science & Engineering. “This achievement will serve as an important foundation for accelerating the practical application of eco-friendly hydrogen production technology.”

 

□ This research was supported by the Nano & Material Technology Development Program of the Ministry of Science and ICT and the National Research Foundation of Korea, as well as the InnoCORE Program of the Ministry of Science and ICT. The findings were published in Small, a prestigious international journal in materials science, with Dr. Jin Young Park and Ph.D. student Haejeong Kim of DGIST participating as co-first authors.

 

Bringing molecular interactions to life: WaterPuzzle makes the invisible world of hydrogen binds easy to learn for students



A new educational activity using 3D-printable magnetic model helps students understand how water molecules interact




Sophia University

Making molecular interactions easy to understand through WaterPuzzle

image: 

 Understanding hydrogen bonding and molecular interactions is essential to understand the chemistry of water, but conventional molecular models often struggle to demonstrate how molecules connect. Researchers from Japan have developed WaterPuzzle, a 3D-printable magnetic molecular model that allows students to physically explore hydrogen-bond networks, ice crystal structures, and the interactions between water and biological molecules.

view more 

Credit: Professor Jiro Kondo, Sophia University






Water is one of the most essential components of life and many of its unique properties arise from interactions between its molecules. Hydrogen bonds influence water’s physical properties, contribute to the formation of ice crystals, and are crucial for normal biological processes. Understanding these interactions is fundamental to chemistry, physics, and biology. However, because molecular interactions take place at a scale that cannot be directly observed, students may struggle to visualize how individual molecules connect and organize into larger structures.

 

Traditional molecular models help students understand the arrangement of atoms within molecules, but most often they cannot demonstrate how separate molecules interact. Although magnetic models have previously been developed to represent intermolecular interactions, there exists an opportunity to use them more extensively to explore the structural properties of water through guided classroom activities. Recognizing this challenge, researchers sought to make chemistry more intuitive through physical exploration rather than relying exclusively on textbooks and static illustrations.

 

In an effort to help students better understand these interactions, a researcher team led by Professor Jiro Kondo, Department of Materials and Life Sciences, Faculty of Science and Technology, Sophia University, developed WaterPuzzle, a magnetic molecular model designed to help students investigate hydrogen bonding and molecular interactions in water.

The study was available online on September 30, 2026, and published in Volume 103 of The Journal of Chemical Education on October 13, 2026, and was co-authored by Yuna Ohtani (Graduate School of Science and Technology, Sophia University), Tania Guadalupe PeƱaflor Galindo (Department of Materials and Life Sciences, Sophia University), and Shota Nakamura (StudioMIDAS Inc.).

 

In Kondo’s words, “Our motivation came from observing that many students struggle to understand chemistry’s underlying principles or fully appreciate the subject through conventional teaching methods. We believe that a more intuitive understanding of the laws of nature could help students develop a stronger affinity for chemistry.”

 

WaterPuzzle consists of 3D-printed water molecule models attached using small neodymium magnets. The magnetic sites represent hydrogen-bond donors and acceptors, with attractive and repulsive forces guiding the pieces towards hydrogen-bond-like arrangements. The researchers developed structured educational activities in which students assemble molecules, construct hydrogen-bond networks, and explore molecular geometry and crystal structures. The STL files required to print the models are provided free of charge, allowing educators to easily fabricate them using commonly available 3D printers.


These activities allow students to explore the tetrahedral arrangement of hydrogen-bonding sites around water molecules and construct the hexagonal networks characteristic of Ice Ih, which is the most common crystalline form of ice under atmospheric conditions. By stacking hexagonal rings, they can investigate how ice forms an open framework that forms the basis for its lower density compared with liquid water. Students can also explore other ice structures, including Ice Ic, Ice II, Ice III, and Ice XVII. Further, combining WaterPuzzle with the previously developed BasePairPuzzle model allows students to understand how water interacts with nucleobases and forms hydration shells around biological molecules.

 

While WaterPuzzle primarily helps in practically understanding molecular structures, it also acts as a tool for educators to encourage active learning and scientific inquiry. Its easy-to-use design could promote active learning and scientific inquiry. Its accessible design could help make complex concepts easier to explore, while free printing files support wider classroom adoption.

 

WaterPuzzle offers a hands-on approach to making chemistry more intuitive, accessible, and enjoyable. By allowing students to physically construct and investigate molecular networks, the activity could help them develop a deeper appreciation of the molecular interactions that shape the natural world and contribute to stronger chemical literacy.

 

Reference

Title of original paper:

WaterPuzzle: An Educational Activity Using a 3D-Printable Magnetic

Molecular Model to Explore Hydrogen Bonding, Ice Crystals, and

Hydration of Molecules

Journal:

The Journal of Chemical Education

DOI:

10.1021/acs.jchemed.6c00443

Authors:

Yuna Ohtani 1, Konatsu Kondo2, Shota Nakamura 3, Tania Guadalupe Peñaflor Galindo1, and Jiro Kondo1*

Affiliations:

1Department of Materials and Life Sciences, Faculty of Science and Technology, Sophia University, Japan

2Independent Researcher, Japan

3StudioMIDAS Inc., Saitama, Japan

 

 

About Professor Jiro Kondo from Sophia University

Jiro Kondo is a Professor in the Department of Materials and Life Sciences at Sophia University in Tokyo, Japan. With a PhD from the Tokyo Institute of Technology in 2004 and postdoctoral research at the University of Strasbourg, his main research focus is in biophysics and structural biology, with particular emphasis on the three-dimensional structures of DNA and RNA and their applications in medicine and nanotechnology. Professor Kondo has also developed innovative educational tools, including BasePairPuzzle and WaterPuzzle, which use magnetic molecular models to make complex scientific concepts more intuitive and accessible to students.

 

About Sophia University

Established as a private Jesuit-affiliated university in 1913, Sophia University is one of the most prestigious universities located in the heart of Tokyo, Japan.  Imparting education through 29 departments in 9 faculties and 25 majors in 10 graduate schools, Sophia hosts more than 13,000 students from around the world.

Conceived with the spirit of “For Others, With Others,” Sophia University truly values internationality and neighborliness, and believes in education and research that go beyond national, linguistic, and academic boundaries. Sophia emphasizes on the need for multidisciplinary and fusion research to find solutions for the most pressing global issues like climate change, poverty, conflict, and violence. Over the course of the last century, Sophia has made dedicated efforts to hone future-ready graduates who can contribute their talents and learnings for the benefit of others, and pave the way for a sustainable future while “Bringing the World Together.”

Website: https://www.sophia.ac.jp/eng/

 

2024 solar storm triggered ultra-relativistic electrons inside Earth’s “impenetrable barrier”






Nagoya University

Ultrarelativistic electrons in impenetrable barrier following solar superstorm

image: 

Ultrarelativistic electrons in impenetrable barrier following solar superstorm

view more 

Credit: Miyoshi et al., Geophysical Research Letters 2026






The Earth is surrounded by an invisible barrier that was thought to prevent highly energetic electrons from reaching closer to our planet. But in 2024, Japan’s Arase space probe detected these electrons well inside the barrier. Now, research led by Nagoya University has found evidence that the electrons were accelerated locally rather than infiltrating from outer radiation belts.

The Earth’s magnetic field traps energetic charged particles, namely protons and electrons, in two donut-shaped belts called the Van Allen radiation belts. These particles can potentially damage hardware and electronics in spacecraft flying through the belts.

At the inner edge of the second Van Allen belt, at roughly 3 Earth-radii away from Earth’s center, electrons with extremely high energies seem to hit an invisible, impenetrable wall.

First discovered in 2014, the source of this barrier is not completely understood. One possibility is a phenomenon known as “plasmaspheric hiss”: low frequency radio waves in the Earth’s magnetosphere that produce static noise when played through a speaker. Human-made very-low-frequency radio transmissions, used to communicate with undersea submarines, may also help shape this boundary by scattering radiation-belt electrons into Earth’s atmosphere.

Under typical conditions, this region of space is devoid of extremely fast-moving electrons. But space weather can be as precarious as what we experience on the planet.

In May 2024, high solar activity unleashed a geomagnetic “superstorm” on Earth. Night skies in Hokkaido and in places as far south as Hyogo prefecture witnessed aurora borealis or northern lights.

During and after this superstorm, the Japanese radiation space probe Arase, operated by JAXA, collected data from within the impenetrable barrier.

And sure enough, it recorded a large flux of high-energy electrons moving close to the speed of light. Some electrons had energies exceeding three megaelectronvolts — high enough to go through some satellite shields. The so-called impenetrable barrier seemed to have been broken.

The researchers looked for possible explanations.

“One of the key questions was how these highly energetic electrons appeared inside the barrier,” said Yoshizumi Miyoshi, a professor at the Institute for Space-Earth Environmental Research (ISEE) at Nagoya University and the lead author of this study. “Were they transported inward from the outer radiation belt, or were they accelerated locally within this region?”

The first clue came from analyzing electron phase space density (PSD), a quantity that describes how electrons are distributed according to their energies and motion. Using measurements collected during multiple Arase orbits, the researchers examined how PSD varied with distance from Earth while accounting for changes in the electrons’ motion.

They found that a distinct local peak in PSD developed near the usual barrier boundary and became stronger over time. Such a growing peak provides evidence that electrons were gaining energy locally, rather than merely being transported inward from the outer radiation belt.

But what gave them this boost? Arase also detected intense electromagnetic waves that repeatedly swept upward in frequency.

“When converted into audio, it sounds like a bird song,” Miyoshi said. These chirping waves, called “chorus waves,” are natural, low-frequency electromagnetic waves that ripple through the Earth’s magnetic field. These waves can transfer energy to electrons when their oscillations match the electrons’ spiraling motion around magnetic field lines.

Their effect was particularly pronounced in May 2024 because the storm had dramatically eroded Earth’s plasmasphere, a region filled with relatively cool charged particles. Its outer boundary retreated unusually close to Earth, leaving the region around the previously impenetrable barrier much less densely populated with plasma. This allowed hotter electrons to reach farther inward and generate chorus waves.

Additionally, the depleted plasma density did not recover quickly. “Typically, the plasmasphere recovers on a timescale of about two days,” Miyoshi said. “During the May 2024 superstorm, however, it took approximately 4.3 to 4.7 days for the plasma density to recover to more than half of its pre-storm level in the observed region.”

This unusually slow recovery allowed the low-density plasma conditions to persist for several days, potentially providing favorable conditions for chorus-wave activity and the continued acceleration of energetic electrons inside the previously impenetrable barrier.

Miyoshi said these findings, published in the journal Geophysical Research Letters, demonstrate that even regions of near-Earth space previously considered relatively protected from extremely energetic electrons can experience substantial radiation enhancements during severe space weather events.

“This discovery highlights the need to understand and predict how energetic electrons behave under extreme space weather conditions,” Miyoshi said. “Such knowledge is important for assessing radiation risks to spacecraft and improving future space weather predictions.”

The findings also provide new insights into how the Earth's magnetosphere responds to extreme solar activity, emphasizing the importance of continuous observations of the near-Earth space environment.

 

New engineering method could help prevent buildings collapsing after column failure 





University of Surrey

Car park collapse in Spain

image: 

Demolition works after car park collapse in Nueva MontaƱa 

view more 

Credit: AUSCULTIA






A new engineering method could be the difference between a building surviving a failed support column and a chain reaction that causes the entire structure to collapse, according to research led by the University of Surrey. 

In a study published in Structural Concrete, researchers introduce a simpler way for engineers to assess how reinforced concrete floors respond when a support column suddenly fails, helping them design buildings that can better withstand unexpected structural damage. 

Modern buildings such as car parks, office blocks and new flat developments are often built using concrete slabs, supported directly by columns to form each floor level. Although the design offers flexibility and makes efficient use of space, it can be vulnerable to a type of structural failure known as ‘punching shear’, where the column effectively punches through the concrete slab above it. If the weight suddenly shifts to other columns, the extra load can potentially trigger a chain reaction known as progressive collapse. 

The dangers of this type of failure were highlighted by the collapse of the Nueva MontaƱa car park in Santander, Spain, in 2020, which researchers used as a real-world case study to help validate their new equations. 

The team worked in collaboration with Universidad PolitĆ©cnica de Madrid, Universidad de Extremadura and industry partner Skidmore, Owings & Merrill (SOM), building on earlier mathematical models to develop and test a set of equations that removes the need for some of the more complex calculations previously required.  

The method allows engineers to assess how much reinforcement might be needed to prevent further structural failure and is compatible with the next generation of Eurocode 2 – the European standard for designing concrete structures – making it easier to incorporate into existing design practices. 

Professor Juan Sagaseta, from the Centre for Civil Infrastructure Systems and Engineering at the University of Surrey, and corresponding author of the study, said: 

"Engineers are under a lot of pressure to get this right. We can't predict every accident or event that might damage a building, but we can design structures so that when something does go wrong, the consequences aren't catastrophic. 

"The loss of a single column should not mean the loss of an entire building. That's why we've worked to make these safety checks easier to carry out, helping engineers make better-informed decisions and ultimately protect the people who use these buildings." 

When tested against existing experimental results and new data from the Nueva MontaƱa car park collapse, the equations successfully predicted the type of structural failure observed at the site due to the failure around a neighbouring column. The findings also showed that the method could be applied to situations involving the sudden loss of multiple columns. 

Lead author Dr Maria Liapopoulou, now a Brunel Fellow at the University of Cambridge, conducted the research while working as a Research Fellow at the University of Surrey. She said: 

"When an incident like the Nueva MontaƱa car park collapse happens, we need to understand exactly what went wrong and what we can learn from it. 

"What was really encouraging was seeing how closely our calculations matched what actually happened there. It's one thing to develop a mathematical model, but being able to test it against a real case study gives us greater confidence that it could make a difference in practice." 

The findings could support future improvements to structural design guidance, helping engineers assess how buildings respond to unexpected damage and reduce the risk of localised failures developing into more widespread collapse. 

[ENDS] 

Notes to editors