Friday, October 30, 2026

 

STI screening linked to fewer preterm births



A Penn Medicine study suggests screening and treatment could help identify infections that often cause no symptoms.




University of Pennsylvania School of Medicine






Screening and treating pregnant patients for three common sexually transmitted infections (STIs) twice during pregnancy was associated with a 23 percent lower risk of preterm birth compared with standard care, according to a randomized clinical trial published in Clinical Infectious Diseases from researchers at the University of Pennsylvania and University of Southern California.

In practical terms, 14.5 percent of participants who received screening and treatment twice during pregnancy had a preterm birth, compared with 18.8 percent of those receiving standard care. Screening only once was not associated with a reduction in preterm birth.

“Complications from preterm birth are among the leading causes of death among children under five years of age globally. This study suggests that testing for STIs during pregnancy could help us find and treat infections that might otherwise go unnoticed, and that screening more than once may be important for reducing the risk of preterm birth,” said co-lead author Andrew Medina-Marino, PhD, adjunct associate professor of Psychiatry at the University of Pennsylvania Perelman School of Medicine. “Because most of the infections we found caused no symptoms, waiting for symptoms alone means we may miss an opportunity to intervene.”

Most infections caused no symptoms

The trial focused on three common, treatable STIs: chlamydia, gonorrhea, and trichomoniasis. These infections have been linked to preterm birth and low birth weight. However, whether routine screening and treatment during pregnancy can improve birth outcomes has remained uncertain.

Researchers enrolled 2,247 pregnant participants at four government health clinics in South Africa and randomly assigned them to one of three groups: screening and treatment at their first prenatal visit with a test-of-cure three weeks later for women treated for a detected STI; screening and treatment at their first visit and again between 30 and 34 weeks of pregnancy; or standard care, in which treatment was based on symptoms.

At the start of the study, about 27 percent of participants tested positive for at least one of the three STIs, and approximately 80 percent of those infections caused no symptoms.

Among participants who were screened again in their third trimester, 9.2 percent tested positive at that visit. Some infections persisted or returned, while others were newly detected in participants who had tested negative earlier in pregnancy.

Results point to potential value of screening

Researchers found preterm birth among 14.5 percent of participants screened twice, compared with 18.8 percent receiving standard care. The one-time screening group had a nearly identical preterm birth rate to the standard-care group, at 18.9 percent.

The twice-during-pregnancy approach did not, however, significantly reduce the study’s primary combined outcome of preterm birth or low birthweight. It also did not reduce low birthweight when researchers considered that outcome separately. The authors therefore caution that the finding on preterm birth needs further study.

“The results give us an important signal, but they don’t settle the question of how often pregnant patients should be screened,” Medina-Marino said. “The next step is understanding when screening can have the greatest impact and which patients are most likely to benefit.”

Building evidence for prenatal screening

The optimal timing of STI screening during pregnancy remains unclear. In this trial, participants entered the study at a median of 13 weeks of pregnancy. Researchers said testing later in pregnancy may have provided another opportunity to identify persistent or newly acquired infections, although additional studies are needed to confirm that explanation.

The authors noted several limitations. The trial was conducted in a single South African setting where STI prevalence was high, which could limit how broadly the findings apply elsewhere. The study also was not designed to determine definitively whether screening benefited particular subgroups of patients.

Still, the researchers said the findings add to growing evidence about whether, when, and for whom STI screening during pregnancy could improve birth outcomes, including in higher-income countries such as the United States.

Editor’s Note

The trial was funded by the National Institute of Allergy and Infectious Diseases through grant R01AI149339.

 

Powering solar-powered flight



Study reveals battery performance targets for solar stratospheric aircraft




Harvard John A. Paulson School of Engineering and Applied Sciences

solar_stratospheric aircraft

image: 

Solar aircraft can fly through the stratosphere to collect atmospheric and climate data. 

view more 

Credit: Electra Aero






A sleek, pilotless, solar-powered airplane that soars through the atmosphere to monitor climate or track wildfires was once just an idea.

Now, these high-altitude specialty aircraft are advancing from early prototyping demonstrations towards potential commercial applications, supported by decades of research and development involving Harvard scientists, aerospace engineers, and industry collaborators.

In a new paper published in ACS Energy Letters, researchers in the John A. Paulson School of Engineering and Applied Sciences (SEAS), in collaboration with partners in industry and the University of Michigan, lay out a pathway to clearing the most significant hurdle still facing extended solar flight: battery performance.

Solar-powered, fixed-wing, long-endurance aircraft are designed to cruise for weeks or months at a time through the stratosphere – twice the 30,000-foot cruising altitude of commercial jets, and higher than most clouds and weather. These aircraft must use excess solar energy during the day to continuously charge their batteries, then rely on those batteries at night.

Harvard researcher Craig Mascarenhas, who leads engineering research on solar aviation through the laboratory of Jim Anderson, the Philip S. Weld Professor of Atmospheric Chemistry at SEAS, spearheaded the study that establishes performance targets for next-generation solar aircraft batteries.

“It’s this circular mathematical relationship where you need more energy storage, but the batteries become heavier, so now you need more power to push it through the air to get more lift,” explained Mascarenhas, who is now an engineer focused on wireless power-transfer systems for NASA lunar missions but maintains a collaboration with Anderson’s lab.

High-resolution atmospheric data for many applications

Anderson, who has worked on solar aircraft concepts for the last three decades, heads the Harvard branch of a research collaboration called SACOS, or Stratospheric Airborne Climate Observing System, which has been funded by NASA and includes partners at MIT as well as private aerospace companies.

If optimized, solar stratospheric flight could provide persistent, detailed atmospheric and climate observations that are difficult and expensive to attain today. The NASA ER-2 high-altitude aircraft, for example, flies scientific missions carrying a pilot and instrumentation to collect data, but only for six to eight hours at a stretch, at tens of thousands of dollars per hour of flight time.

By contrast, a modern, unmanned solar aircraft could remain airborne for months, require fewer personnel and lower operating costs, and could be used to, for example, repeatedly monitor the same location for high-quality data. Potential value would range from new atmospheric chemistry to hurricane tracking to wildfire monitoring and prediction.

Energy density over power density

In their analysis, featured on the journal’s cover, the researchers identified 500 watt-hours per kilogram as an important threshold for the energy density of a solar stratospheric aircraft’s battery. At that level, they argue, persistent flight becomes viable across many parts of the world where atmospheric conditions allow.

By comparison, today’s commercial electric-vehicle batteries sit in the roughly 250 watt-hour per kilogram range, while experimental or specialty cells in the 400 watt-hour per kilogram range are already available. “We’re almost there,” Mascarenhas said. “Those cells are very expensive right now, but they’re getting cheaper very quickly.”

For this type of aircraft, the paper argues, energy density matters far more than power density, given that the aircraft’s power demands are exceedingly low, but the energy required to store enough energy to main flight remains high. Thus, battery developers should focus on prioritizing energy density, rather than optimizing both energy and power density equally, as is a more conventional principle of engineering. The study also drew on battery-science expertise from coauthors Venkatasubramanian Viswanathan and Shashank Sripad, whose work focuses on next-generation energy storage and electric aviation.

The paper is co-authored by John Langford, an aerospace entrepreneur whose companies  have built and flown experimental solar aircraft, and with whom Anderson has had a long-term research collaboration. 

Langford’s company Iris Aero is currently funded by a U.S. Department of Agriculture National Institute of Food and Agriculture grant, with the Harvard team serving as a research partner. Anderson and Mascarenhas are leading the research direction on the effort, which aims to support deep-learning and radiative transfer models for wildfire mapping and environmental sensing, enabled by stratospheric airborne observation as described in the recent ACS Energy Letters paper.

Mascarenhas said he is particularly motivated by the wildfire application. “I’m passionate about reducing the damage and destruction from wildfires across the world,” he said. “I think the capabilities that this project uniquely unlocks are very exciting.”

 

More than half of pilots say they flew while tired as trust in reporting systems remains low, survey finds

Pilot fatigue remains a major aviation concern.
Copyright Cleared/Canva


By Marta Iraola Iribarren
Published on

Pilot fatigue remains a major aviation concern, with many reporting nodding off during flights instead of declaring themselves unfit to fly.

Fear of negative consequences and a lack of trust in reporting systems are among the barriers that prevent pilots from declaring themselves unfit to fly due to fatigue, according to a new survey by the European Cockpit Association (ECA).The ECA identified head nodding, struggling to keep their eyes open, impaired alertness and microsleeps — brief, involuntary episodes of sleep — as signs of fatigue that can affect pilots on the flight deck.

More than half of pilots surveyed said they had flown while tired, while over 76% reported experiencing at least one microsleep on the flight deck in the previous four weeks, highlighting concerns about fatigue management in aviation.

Conducted by aviation consultancy Baines Simmons, the survey gathered responses from 7,200 pilots across 32 countries.

More than half of respondents reported that at least once in the previous three months they had operated a flight before realising in hindsight that they should have declared themselves unfit to fly due to fatigue.

The most commonly cited barrier was concern about management’s reaction, reported by 47% of pilots. A further 44% said they did not want to draw attention to themselves, while 35% were reluctant to inconvenience their employer.

“When pilots fear career consequences, fatigue goes unreported and the risk returns to the cockpit,” said ECA Board Director Captain Coen George.

Fatigue can result from acute sleep loss, long or demanding flight duty periods or repeated inadequate recovery time between duties.

The report highlights the particular dangers of cumulative fatigue, which can build up over time. Pilots may find it harder to recognise the resulting impairment in advance than the effects of short-term sleep deprivation.

Despite widespread awareness of fatigue risks, the problem remains underreported in the aviation industry.

While 82% of pilots knew how to submit a fatigue report, only 12% said they trusted the reporting system, and just 11% reported that fatigue submissions had led to operational changes to improve safety.

Half of respondents said fatigue risks at their airline were either poorly managed or not managed at all.

Fatigue is a known problem

Fatigue among aircrew is not a new concern. Aircrew fatigue was identified as one of the most consistent and prominent safety concerns in the European Union Aviation Safety Agency (EASA) report published in June 2026.

It linked fatigue to several operational and socio-economic factors, including flight scheduling, short-notice roster changes and the use of commanders’ discretion to extend flight duty periods beyond their scheduled limits.

EASA highlighted the need for targeted safety initiatives to improve reporting quality and awareness and foster a workplace culture where personnel can declare themselves tired without fear of reprimand.

 

People are influenced by unreliable information yet remain aware of its influence on their decisions




University of Tsukuba





Tsukuba, Japan—Every day, people make decisions based on information obtained from social media, news outlets, online reviews, and interpersonal communication, all of which vary in reliability. Numerical indicators and labels designed to convey information reliability, such as user ratings and fact-checking systems, have become increasingly common online. However, an important question remains: When reliability is explicitly stated, do people use this information appropriately for making decisions?

Participants completed a decision-making task in which each information source was accompanied by a numerical value indicating the probability that the source would provide the correct information. Participants were asked to integrate information from multiple sources when making a judgment. The results showed that participants assigned greater weight to sources with higher reliability but did not use the stated reliability values exactly as they were presented. Notably, information labeled as having a 50% probability of being correct, which should theoretically provide no useful basis for decision-making, still biased participants' choices toward the content of that information.

In a separate experiment, participants were also asked to report how strongly they believed each source had influenced their judgment. The results indicated that the participants could often recognize, to some extent, when unreliable information had affected their decisions. Although they were influenced by unreliable information, they also showed some metacognitive awareness of that influence.

These findings highlight the importance of providing explicit information reliability indicators and understanding how people interpret and integrate this information during decision-making. The results may help explain how individuals respond to information of varying trustworthiness in today's information environments.

###
This work was supported by an ESRC grant ES/V00378X/1 awarded to Lucie Charles and Partrick Haggard.

 

Original Paper

Title of original paper:
How does explicit reliability guide choices? Effect of trustworthiness on choice and metacognition

Journal:
PLoS Computational Biology

DOI:
10.1371/journal.pcbi.1014818

Correspondence

Assistant Professor OTA, Keiji
Advanced Research Initiative for Human High Performance (ARIHHP), Institute of Health and Sport Sciences, University of Tsukuba

Related Link

Institute of Health and Sport Sciences

 

Europe launches VICTOR-XR to make virtual worlds safer, smarter and connected to reality



A new Horizon Europe project brings together 16 organizations to transform manufacturing, human-robot collaboration and rehabilitation through next-generation Extended Reality





Universitat Jaume I

Europe launches VICTOR-XR to make virtual worlds safer, smarter and connected to reality

image: 

Virtual worlds are rapidly moving beyond gaming and entertainment into factories, hospitals and training environments. Yet one major challenge remains: ensuring that what happens in a virtual environment accurately reflects what is happening in the real world.

To address this challenge, the European research initiative VICTOR-XR, launched under Horizon Europe’s Cluster 4 – Digital, Industry and Space, within the HORIZON-CL4-2025-03-HUMAN-14 topic, brings together 16 partners from seven countries to develop a new generation of intelligent, human-centric Extended Reality (XR) technologies.

Over the next three years, VICTOR-XR will create technologies that continuously synchronise physical environments with their virtual counterparts using Digital Twins, multimodal sensing, and AI-powered cognitive assistants. By combining vision, speech, gaze tracking, biosignals and haptic feedback, the project aims to deliver immersive experiences that are more realistic, more responsive and ultimately more trustworthy.

At the heart of the project is a new concept known as Virtual-Physical Consistency, a framework designed to ensure that virtual worlds remain accurately aligned with real-world processes, people and environments in real time. The technology will enable systems to identify discrepancies, understand user actions and provide intelligent assistance through adaptive XR interfaces and AI co-pilots.

Rather than developing technology in isolation, VICTOR-XR will validate its innovations in three large-scale pilot environments where accuracy, safety and human performance are critical.

In the automotive sector, VICTOR-XR will help engineers and operators interact with digital twins of products and production processes before physical prototypes exist. By identifying potential assembly and design issues earlier, manufacturers can reduce errors, shorten validation cycles and improve productivity while creating new immersive training opportunities for workers.

In advanced manufacturing environments, workers increasingly collaborate with robots. VICTOR-XR will create XR interfaces that visualise robot intentions, monitor operator actions, and deliver adaptive guidance in real time. The goal is to improve productivity while increasing safety, trust and ergonomics within collaborative workspaces.

In healthcare, the project will support rehabilitation programmes for people with chronic musculoskeletal conditions. Through immersive XR experiences, digital twins and empathetic AI co-pilots, patients will receive personalised guidance and feedback, while clinicians gain new tools to monitor progress and adapt therapies remotely.

view more 

Credit: VICTOR-XR






Virtual worlds are rapidly moving beyond gaming and entertainment into factories, hospitals and training environments. Yet one major challenge remains: ensuring that what happens in a virtual environment accurately reflects what is happening in the real world.

To address this challenge, the European research initiative VICTOR-XR, launched under Horizon Europe’s Cluster 4 – Digital, Industry and Space, within the HORIZON-CL4-2025-03-HUMAN-14 topic, brings together 16 partners from seven countries to develop a new generation of intelligent, human-centric Extended Reality (XR) technologies.

Over the next three years, VICTOR-XR will create technologies that continuously synchronise physical environments with their virtual counterparts using Digital Twins, multimodal sensing, and AI-powered cognitive assistants. By combining vision, speech, gaze tracking, biosignals and haptic feedback, the project aims to deliver immersive experiences that are more realistic, more responsive and ultimately more trustworthy.

At the heart of the project is a new concept known as Virtual-Physical Consistency, a framework designed to ensure that virtual worlds remain accurately aligned with real-world processes, people and environments in real time. The technology will enable systems to identify discrepancies, understand user actions and provide intelligent assistance through adaptive XR interfaces and AI co-pilots.

Rather than developing technology in isolation, VICTOR-XR will validate its innovations in three large-scale pilot environments where accuracy, safety and human performance are critical.

In the automotive sector, VICTOR-XR will help engineers and operators interact with digital twins of products and production processes before physical prototypes exist. By identifying potential assembly and design issues earlier, manufacturers can reduce errors, shorten validation cycles and improve productivity while creating new immersive training opportunities for workers.

In advanced manufacturing environments, workers increasingly collaborate with robots. VICTOR-XR will create XR interfaces that visualise robot intentions, monitor operator actions, and deliver adaptive guidance in real time. The goal is to improve productivity while increasing safety, trust and ergonomics within collaborative workspaces.

In healthcare, the project will support rehabilitation programmes for people with chronic musculoskeletal conditions. Through immersive XR experiences, digital twins and empathetic AI co-pilots, patients will receive personalised guidance and feedback, while clinicians gain new tools to monitor progress and adapt therapies remotely.

Human-centred technology by design

As AI and virtual worlds become increasingly integrated into everyday life, VICTOR-XR places ethics, transparency and inclusion at the centre of its approach. Privacy, accessibility, explainability and compliance with European regulatory frameworks will be embedded across all developments, ensuring that technological innovation remains aligned with European values.

The project also aims to support Europe’s strategic ambitions in Virtual Worlds and Industry 5.0 by contributing to standards development, promoting interoperability and creating new XR-based learning and training pathways that can accelerate adoption across sectors.

“Virtual worlds can only become truly useful when they remain connected to reality. Through VICTOR-XR, we are building technologies that help people, machines and digital systems work together more effectively, safely and intelligently.”

By combining artificial intelligence, digital twins, and immersive technologies, VICTOR-XR aims to show how virtual worlds can create measurable benefits for industry, healthcare professionals, and citizens alike, paving the way for a more human-centric digital future for Europe.

More information

Website: victorxr.eu

LinkedIn: linkedin.com/company/135256989/

YouTube: https://www.youtube.com/@VICTOR-XR-project